Part Location Diagram of 584429-01 DeWALT Brush Kit
See part 5 in the diagram
( Grid squares measure 1x1 inch )

Brush Kit 584429-01

Manufactured by:
DeWALT
ERP Number:
ERP10180227
Part Number:
584429-01
Original Equipment Manufacturer ?
$41.65
Special Order

Easy 

15 - 30 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine manufacturer-sourced component which is made for DeWALT rotary hammers. Carbon brushes are one of the most commonly replaced power tool components. They play a key role by conducting an electric current in a motor. Unfortunately, over time brushes will wear out and they may begin to fail eventually requiring replacements to ensure proper performance. Keep in mind this high-quality kit includes two durable carbon brushes with attached lead wires. A screwdriver will be needed to perform this repair.

Troubleshooting

This part works with the following brands:
  • DeWALT
This part works with the following products:
  • Hammer Drill
  • Hammer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Rotary hammer motor would not run.

Richard from Chappaqua, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
584429-01
Removed torn screw from handle.
Pushed out steel pin holding handle to body.
Removed 4 torx screws holding motor cover and removed cover.
Blew dust out of unit.
Removed brush wire.
Removed 2 screws holding brush holder to case.
R&R brush. Repeat for other side.
Reassemble
Did you find this story helpful?
Thank you for voting!

Premature bad brush

Ernest from Merced, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
584429-01
1. Took off the black motor housing.
2. Used a Torx driver to remove the brush holder.
3. Pulled off wire clips.
4. Swapped out the brushes.
5. Put back in reverse order and was done.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10180227
Manufacturer Part Number: 584429-01
Brand Model Number Description
DeWALT D25303 Hammer Drill - SDS Rotary Hammer
DeWALT D25303K Hammer - 1 Sds Hammer
DeWALT D25304 Hammer Drill - SDS Rotary Hammer
DeWALT D25304K Hammer - 1 Sds Hammer
DeWALT D25313 Hammer Drill - Hammer Drill
DeWALT D25313K Hammer Drill - 1" L-Shape SDS Rotary Hammer
DeWALT D25314 Hammer Drill - SDS Hammer
DeWALT D25314K Hammer - 1 Sds Hammer
DeWALT D25323 Drill - Dewalt D25323-Type-2 Parts
DeWALT D25323K Hammer Drill - 1" L-Shape SDS Rotary Hammer
DeWALT D25324 Drill - Dewalt D25324-Type-2 Parts
DeWALT D25324K Hammer Drill - Rotary Hammer
DeWALT D25330 Hammer Drill - Chipping Hammer
DeWALT D25330K Hammer Drill - Compact SDS Chipping Hammer