GROMMET 2600703011

To replace the New Grommet I just had to unscrew all the screws holding the two halves of the Hammer Drill Case together, open the Bosch B6600 Hammer Drill Case, loosen the power cord screws, remove the cord with old broken grommet and replace the New Grommet on the old power cord. While I had the drill apart I went ahead and removed the ... Read more old grease, cleaned everything well before putting new grease in the drill and putting it back together. Then I removed the old Keyless Chuck using a vise, which destroyed it but it had no screw holding it in place and had locktight on the main shaft of the drill to hold the Keyless Chuck in place. I then screwed the New Keyless Chuck on the main shaft of the drill, installed the New Chuck Screw (which is left-handed) and tighten it up to hold the New Chuck in place. That is all there was to repairing my Like-New Bosch B6600 Hammer Drill.