Part Location Diagram of 2608572034 Bosch Tool KEYLESS CHUCK
See part 80 in the diagram
Replacing your Bosch Hammer Drill KEYLESS CHUCK
( Grid squares measure 1x1 inch )

KEYLESS CHUCK 2608572034

Manufactured by:
Bosch Tool
ERP Number:
ERP19509605
Part Number:
2608572034
Original Equipment Manufacturer ?
$99.13
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Bosch
  • Skil
This part works with the following products:
  • Hammer Drill
Part# 2608572034 replaces these:
2608572034,

Videos For installing this part.

?
Replacing your KEYLESS CHUCK
Replacing your KEYLESS CHUCK

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The Grommet on the Power Cord was broken and the Keyless Chuck Jaws were bad.

Don from Corpus Christi, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
2608572034, 2600703011
To replace the New Grommet I just had to unscrew all the screws holding the two halves of the Hammer Drill Case together, open the Bosch B6600 Hammer Drill Case, loosen the power cord screws, remove the cord with old broken grommet and replace the New Grommet on the old power cord. While I had the drill apart I went ahead and removed the old grease, cleaned everything well before putting new grease in the drill and putting it back together. Then I removed the old Keyless Chuck using a vise, which destroyed it but it had no screw holding it in place and had locktight on the main shaft of the drill to hold the Keyless Chuck in place. I then screwed the New Keyless Chuck on the main shaft of the drill, installed the New Chuck Screw (which is left-handed) and tighten it up to hold the New Chuck in place. That is all there was to repairing my Like-New Bosch B6600 Hammer Drill.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19509605
Manufacturer Part Number: 2608572034
Brand Model Number Description
Bosch 0603161737 Hammer Drill - Percussion Drill
Bosch 0603312630 Hammer Drill - Percussion Drill
Bosch 0603312632 Hammer Drill - Percussion Drill
Bosch 1141VSR Hammer Drill - 1/2" Hammer Drill
Bosch B6600 Hammer Drill - 1/2" Hammer Drill
Bosch GSB18-2RE Hammer Drill - Percussion Drill
Bosch HD6876 Hammer Drill - Percussion Drill
Bosch PSB450R Hammer Drill - Percussion Drill
Bosch PSB680-2 Hammer Drill - Percussion Drill
Bosch PSB680-2RE Hammer Drill - Percussion Drill
Bosch PSB680-2RPES Hammer Drill - Percussion Drill