This is a genuine manufacturer sourced replacement thermometer designed for use with Weber grills. It can be used to measure temperature inside the grill and the temperature of the food. Mounting tab fits into slot in the bezel to secure the position of the gauge. This part is made out metal and it is sold individually. Please note the, bezel is sold separately. Dial reads 150 - 700 degrees F.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy Repair, Great Part!
The thermometer was in great condition when it arrived. It fit well and now my Weber grill is good as new! I am very pleased!
Guest - June 15, 2019
Verified Purchase
★★★★★
★★★★★
Perfect part
Arrived in a timely manner and fit perfectly!!
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
Great part and price
Works perfectly in my weber grill. Delivery was fast and price reasonable
Guest - September 16, 2019
Verified Purchase
★★★★★
★★★★★
Great Service
Part arrived fast and it fit perfectly
Guest - May 7, 2020
Verified Purchase
★★★★★
★★★★★
Thermometer was right replacement for Weber
Flawless transaction,as described,glad to find actual Weber part after long frustrating web search turning up knockoffs.
Guest - May 25, 2020
Verified Purchase
★★★★★
★★★★★
Easy as pie!
It was a perfect fit and easy to install. It works perfectly. I’d definitely recommend.
Guest - July 2, 2020
Verified Purchase
★★★★★
★★★★★
Exact match.
A
Guest - July 2, 2020
Verified Purchase
★★★★★
★★★★★
perfect replacement
Item arrived in perfect condition. It is installed and working great.
Joseph - July 2, 2020
Verified Purchase
★★★★★
★★★★★
Hard to find part - found here and came as promised!
A thermometer for my genesis series grill. Couldn’t find anywhere else
Guest - July 12, 2020
Verified Purchase
★★★★★
★★★★★
Appreciated the Communication
The thermometer I received was the exact replacement part that I needed. It was easy to install and worked perfectly! There was a slight delay in delivery (supposedly due to COVID) but the company did a good job communicating with me which helped me adjust expectations.
Guest - October 28, 2020
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed old installed new, simple wing nut holds in place
Did you find this story helpful?
Thank you for voting!
The underlying frame of Webber grills is flimsy and will rust out within a few years. The bottom panel was not supporting the side panels any longer and had to be replaced.
0. Remove all \"junk\" inside the cabinet in addition to the tank.
1. Remove the grills and flavor bars.
2. Unscrew the two screws that hold the drip pan housing to the bottom panel you are replacing.
3. Tape/rubber band the cabinet doors together so they wouldn\'t open when I tipped the forward.
4. Put a piece of
... Read morecardboard in front of the grill so the decking wouldn\'t get damaged.
5. Locked the casters then leaned the grill forward; don\'t lower it by grabbing the cover handle it will open and you\'ll most likely drop the grill forward... I grabbed the front of the shelves and lowered it till it was laying face down.
6. Remove six bolts with 7/16\" socket. Push panel in on one side and it will enable you to pull it out through the bottom.
7. Replace the retaining nuts (6), the drip pan frame plastic anchor nuts, and reinsert the bottom plate.
8. Replace the new bolts and tighten firmly (don\'t over tighten).
9. Lift the grill upright and remove the tape holding the cabinet doors shut.
10. Screw the drip pan frame screws into the new plastic holding nuts in the bottom panel.
11. Replace tank, flavor bars, and grills.
12. Fire it up!
I removed LP manifold and replaced with natural gas manifolds, replaced spark ignitor and thermometer. Install gas hose. Do not purchase quick disconnect, the hose has it with it. Cleaned grill looks like new. Easy and grill works great
Did you find this story helpful?
Thank you for voting!
Bottom and both side panels rusted badly causing one door to fall off, the other about to and large holes in the bottom of the cabinet. The back panel was also rusted but I was able to sand and paint
1. Remove the door that had not fallen off
2. Disconnect natural gas supply.
3. Remove the fire box control panel, internals and drip trays to lighten the assembly.
4. Attempted to separate the lid from the firebox by removing the hinge pins. However, the pins were seized to one side of the hinge and would not slide out
... Read moreeven with WD40 and gentle persuasion. I left the lid attached as I feared breaking the hinge.
5. Removed the lid/firebox assembly. (I should have had a helper. It is not too heavy but is awkward.)
6. Remove the back from the grill cart - clean, remove surface rust and paint.
7. Assemble new grill cart using new sides, bottom and old back.
8. Reassemble the rest of the grill in reverse order of disassembly.
Unscrewed old wing nut holding thermometer from inside grill good with fingers, did not need pliers since was not rusted in place.
Removed old thermometer and round stainless steel bezel surrounding it. Cleaned area of dirt & grease with Windex & paper towel.
Placed new thermometer into bezel, aligned & inser
... Read moreted in hood hole, tightened wing nut on inside by hand. ThatGÇÖs it. Took 5 min max. Easy.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
