This is a manufacturer approved replacement part crossover/carryover tube. It is specially designed for use with Weber gas grills. The purpose of this tube is to allow gas to flow from one burner to another. They also help to secure the burners in place. Over time due to heat and moisture carryover tubes may begin to rust or warp requiring replacement. This would be the time to replace them. This item is made out of metal and it is sold individually.
Troubleshooting
This part works with the following brands:
Weber
This part works with the following products:
Grill
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Web-site is very user friendly
I have had my Weber Grill for 20 years. I replaced the cross-over tube, now I may get another 20 out of it. :>)
Guest - May 28, 2019
Verified Purchase
★★★★★
★★★★★
Quick service and reasonable shipping cost!
A part that is difficult to find without buying the entire and more costly assembly. Combined with reasonable shipping rates makes this purchase a rewarding experience. Shared your website with family and friends!
Daryn - July 30, 2019
Verified Purchase
★★★★★
★★★★★
easy transaction. fast shipping. exact fit
easy transaction. fast shipping. exact fit
Guest - September 25, 2020
Verified Purchase
★★★★★
★★★★★
easy and quick!!
directions were perfect
Guest - October 6, 2020
Verified Purchase
★★★★★
★★★★★
Quick and easy
received what i ordered quick and at a reasonable price. I could only find complete systems locally.
Guest - May 11, 2021
Verified Purchase
★★★★★
★★★★★
Perfect fit dash shipping
Just what I ordered, perfect fit and fast shipping
Guest - September 17, 2022
Verified Purchase
★★★★★
★★★★★
easy repair, works well
I needed to replace this part. The grill lites the way it is supposed to again.
Guest - October 27, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I started by cleaning up the inside of the grill. Then took out the cast iron grills, flavorizer bars, under tray. I removed the top control plate on the right, then started to look for nuts and bolts. I found a screw on the ends of the burners on the left side. Thank goodness Webber uses top quality hardware so There was no rotting scre
... Read morews to fight with. I next had to figure out how to remove the control section before removing the burners. Once I figured that out the burners came out with ease. I installed all the new parts in reverse order. This whole project is a very straight forward operation if your good with hand tools. All I needed was a straight screwdriver, 5/16 socket and ratchet with extension, a pair of Chanel locks and a scraper to clean the inside with. The instructions I received with the burner kit were totally useless as they were for another replacement part that had nothing to do with what I was doing. As I said though, THIS job is straight forward.
Removed two screws holding control cover.
Removed two nuts and washers holding venturi bracket.
Slid burners out about an inch in order to remove cross
over tube. Pulled burners out by rotating 90 degrees.
Reversed process with new burners and cross over.
Works great, good flame full length of burners.
Remove the two knobs on the control panel.
Remove the two screws that hold the control panel in place.
Lift off control panel exposing manifold.
Remove the two nuts (7/16?) that hold the manifold bracket to the side of grill.
Remove manifold by sliding back, then slide burner tubes back.
May need to loosen he
... Read morex screws that hold burners in place, but these don\'t need to come all the way out out. (Nut driver is better than straight screwdriver)
Once burner tubes are unseated, position new crossover tube.
Reassemble.
Read less
Did you find this story helpful?
Thank you for voting!
The original crossover tube disintegrated after 20 years. This prevented the back burner from lighting.
1. Removed original broken crossover tube when issue was discovered, It just pulled out
since it was split.
2. Disconnected and removed propane tank.
3. Removed grates and flavor bars.
4. Cleaned, removed and droppings inside of grill and drip trays. This was to prevent
dumping all onto the deck.
... Read morer />5. Removed 2 screws holding left end of burners to the grill.
6. Using socket and pliers to hold wing nuts, loosened burners from under control shelf and
slid out far enough to install new crossover tube into both burners.
7. Reassembled in opposite order.
8. Tested grill, worked like a new grill.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10512242
Manufacturer Part Number: 83738
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Grill","title":"Grill","url":"/parts/bbq/grill/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/bbq/grill/hoses-and-tubes/"},{"position":3,"name":"83738","title":"83738","url":""}]
_WW_1.gif "Part Location Diagram of 83738 Weber Crossover Tube")
_WW_1.gif "Part Location Diagram of 83738 Weber Crossover Tube")
