This replacement carryover tube is an authentic OEM sourced high quality item that is specially designed for Char-Broil gas grills. The purpose of the carryover tube is to provide support for the burners, and carry the gas from one burner to the next. Over time in the combination of heat and moisture the tubes may begin to rust or warp eventually requiring replacement. This item includes one durable stainless steel carryover tube and two metal cotter pins that are used to secure it.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Got my grill working again. Very happy
The burners on my grill had rusted out causing uneven heating. I found these replacements and they are a perfect fit. Shipping was fast and easy.
Very happy with my purchase.
Guest - September 14, 2020
Verified Purchase
★★★★★
★★★★★
cross over tube for grill
fit as expected works well.
Guest - September 6, 2022
Verified Purchase
★★★★★
★★★★★
Replacement part fit perfectly
Grill works like new
Guest - June 6, 2023
Verified Purchase
★★★★★
★★★★★
Great service
Parts all fit fine and work great. Would of had my parts days sooner if shipper would not have decided that my package needed a tour of the Midwest.
Guest - October 1, 2020
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(17 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Two additional screws are needed to reattach the igniter as the old ones had to be drilled out.
1. Remove old grill plates.
2. Remove heat shields.
3. Remove igniter from the burner. Had to use a drill and bit to get old screws out as they rusted together.
4. Remove two tube burners. Had to use a drill and bit to get old screws out as they rusted all together with the mounting bracket at the rear of the grill.
... Read more/>5. What was left of the carryover tube came out with the two tube burners. Cleaned out all the old grease and debris from grill cooking chamber.
6. Mounted two new tube burners, screws and nuts were provided for the attachment.
7. Mounted the igniter to the right tube burner, needed two additional screws for this.
8. Mounted the carryover tube to the two tube burners, screws were provided for the attachment.
9. Tested the tube burners to be sure they worked properly.
10. Placed the two heat tents over the tube burners.
11. Placed the two cooking grates into their respective spots.
Was easy to repair except for removal of very rusted screws that I had to drill out with a Dremel tool. With new parts in the gill now works correctly and safely.
Removed the old parts
Thoroughly cleaned bottom of firebox (since it was so convenient)
Assembled and installed replacement parts
The only difficulty I ran into was that the old screws had eroded from the back end of the burners and the tabs to screw the new ones down had the remnants of the old screws, nuts, and washers
... Read more kind of welded over the holes. The tabs were delicate and I was sure they would break off if I drilled them out. I ended up placing 6\" channel locks on the nuts and gently massaged back and forth a few times and they came loose.
The rest was easy breezy!
I removed all of the inner parts of the grill and put in new burners, heat tents and crossover
tube as well as purchased a new grate for the grill. The total cost was about $35.00 but a new grill would have been at least $200. I polished the outside with steel wool and spray painted it with heat resistant spray paint. Your schematic
... Read more of all the parts was invaluable.
G. Smith
1. Removed old parts using Phillips screwdriver and 5/16 wrench.
2. Took advantage of emptied grill tub to thoroughly clean it out.
3. Installed new burner tubes & carryover tube with supplied screws, reusing the screws & nuts from the far end of the grill\'s burner tubes,(5/16 wrench used here and cleaning them first).
... Read more/> 4. Placed the new heat tents over burners.
Done!
Read less
Did you find this story helpful?
Thank you for voting!
The screws were to hard to get out most off them were rusted
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Grill","title":"Grill","url":"/parts/bbq/grill/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/bbq/grill/hoses-and-tubes/"},{"position":3,"name":"G432-0003-W2","title":"G432-0003-W2","url":""}]
_WW.gif "Part Location Diagram of G432-0003-W2 Char-Broil Carryover Tube")
_WW.gif "Part Location Diagram of G432-0003-W2 Char-Broil Carryover Tube")
