Tube Asm-breather 618-04466

1. Remove battery
2 Remove screws from support bracket of the reservoir
3 Disconnect breather from reservoir by removing spring hose clamps.
4 At this point, cut the hoses on the defective breather to allow more flexibility when removing from remaining fittings.
5 Remove spring fittings from hose where the ... Read more y attach to both right and left hydrostatic motors.
6. Remove right and left hoses from hydrostatic motors.
7. Feed the replacement breather (hose) upward and through the plate beneath seat and reconnect to reservoir, securing with spring hose clamps.
8. Reinstall screws that secure the reservoir to frame.
9. Connect each right and left hose to hydrostatic motors, securing with spring hose clamps.
10. Reinstall battery. .
11. Fill reservoir with required oil to factory designated level.
12. Check for leaks.