This is an authentic Karcher replacement part that has been sourced from the original manufacturer to be used with pressure washers. The o-ring is used to seal the connection between the flanged spacer and the short oil housing/piston guide. This item is available as an individual replacement part.
Troubleshooting
This part works with the following brands:
Karcher
This part works with the following products:
Pressure Washer
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
1- 2 hours
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
I replaced the timing belt, the upper cam gear and the 2 seals, one on the engine and one on the pump. One trick I learned was to install the timing belt on the crank gear and cam gear before I put the 2 halves on the engine back together. It will make the job easier because the belt is very tight when new and installing it on the cam gea
... Read morer was impossible. hope this helps
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9984349
Manufacturer Part Number: 6.362-537.0
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Pressure Washer","title":"Pressure Washer","url":"/parts/power-tool/pressure-washer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/pressure-washer/seals-and-gaskets/"},{"position":3,"name":"6.362-537.0","title":"6.362-537.0","url":""}]
_WW_8.gif "Part Location Diagram of 6.362-537.0 Karcher O-ring Seal 63,17x 2,62")
_WW_8.gif "Part Location Diagram of 6.362-537.0 Karcher O-ring Seal 63,17x 2,62")
