This replacement drive cable is a high-quality OEM sourced item that is specially made for Husqvarna walk-behind lawn mowers. The drive cable connects the handle drive control lever to the transmission and engages the transmission to move the mower when you pull the drive lever up. Replace the drive cable if it's broken or frozen up inside the sheath and your lawn mower won't move. Please note this durable rubber insulated metal drive cable is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair, part fit perfectly
The part arrived quicker than expected, fit perfectly and my mower is working like new again
Kent - May 19, 2021
Verified Purchase
★★★★★
★★★★★
Simple process
Unfortunately, the parts were not what I needed, but the purchase and return process was perfect. I have used ereplacementparts.com on a number of occasions in the past and will do so again.
Guest - June 3, 2021
Verified Purchase
★★★★★
★★★★★
Easy Replacement, Worked as Expected
The part arrived sooner than expected. Once installed the rear wheel drive function returned to normal.
Richard - July 10, 2021
Verified Purchase
★★★★★
★★★★★
Exactly what I needed.
Arrived on time and what I needed.
Guest - September 8, 2021
Verified Purchase
★★★★★
★★★★★
The part worked as expected.
Got the part in a timely manner. Mower works great again.
Guest - April 21, 2020
Verified Purchase
★★★★★
★★★★★
Lawnmower drive cable
Thanks I was having trouble finding this cable . It was easy to put on and I got the part in a timely manner.
Guest - September 7, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Using appropriate wrench remove old cable from control handle and thread new cable in brackets where old cable was removed ( note placement of old cable within control handle before detaching.. the inside of the handle contains the 2 squeeze triggers for determining your walking speed) very easy change out simple remove and replace.
... Read more
Underside repair- Depending on which side the mower is to be turned gas or oil will leak out. remove all dirt and grass and .note position of spring and cable attachment ( take picture with camera ( phone) to help in reassembly ).
1- removed gas from tank and turned mower on side. 2- removed mower blade and belt guards.3- some mowers require removing drive wheels to expose screws holding belt guards as this makes it much easier to remove/replace screws( recommended-only one nut holds the wheel on) 4- remove blade hub if required to relieve belt tension and release tension on axle drive to disconnect old cable ( use screwdriver to push in expandable connector from under mower deck) be sure to note placement of connector to belt guard before removing. don\'t lose spring and reuse.
5- after removing,replace old cable by pushing end of new cable through hole ( end will expand and lock in place. replace spring in former location and connect end of new cable where original was located in belt guard. replace blade hub and belt if removed and reattach all guards in reverse order from disassembly.
6- replace blade and tighten to recommended torque. replace wheels if removed and return mower to upright position. Refill gas tank and check oil for proper level.
7- the top of the cable can be turned by hand to adjust the cable if additional tension is needed for walking speed.
When disassembling, make note of the cable path and donGÇÖt lose the plastic bushing in the handle. Disconnecting of f the cable from underneath took a few minutes due to the tight space. When reassembling make sure to reconnect under the deck first because you need as much slack as you can get to reconnect the z end of the cable. Othe
... Read morer than that pretty easy. Also you do need a star bit to take apart the drive handle assembly. Two of the screws hold the assembly together without connecting to the bracket if you prefer to keep it together before attaching to the bracket.
1.- Husqvarna AWD has a \"handles box\" which I had to open to be able to remove a broken piece of cable from inside box.
2.- I had to get underneath the mower to remove a black plastic cover and detach the other end of the cable (did not have to remove blades).
3.- Installing the new cable was fairly easy, just went back on
... Read morethe steps.
Removed the drive paddles from the handle. Note the small springs that keeps tension on paddle handles. Cut the zip ties holding cables together. Used long needle nose pliers to compress plastic clip from the underneath of mower deck. The clip holds the cable secure through mower deck. Unhook S shapes hook at end of cable located at the t
... Read moreransmission. Reverse progress to assemble. Process is very easy if you take note of how it is assembled as you break it all down.
Removed broken cable, replaced it with the new one. Replacement comprises these steps: 1) Unplug the ignition wire from the spark plug; 2) Slowly pull the starter cord until resistance of the compression stroke is felt (indicating the valves are closed; 3) Tip the mower onto it\'s side such that the side with the carburetor and air filter
... Read more is facing up (muffler side faces down); 4) squeeze the retention tabs on the strain relief grommet where the clutch cable enters the mower deck - wiggle and pull the grommet to release it from the mower deck - requires long-reach pliers to reach the tabs from the underside - pay attention to how the end of the clutch cable fits into the clutch actuator; 5) Use a Torx screwdriver to unscrew the clutch handle assembly from the handlebar, which also opens the body of the assembly, to release the other end of the clutch cable; 6) Install the new clutch cable in reverse order. It may be helpful to lubricate the retention tabs of the strain relief grommet (I used silicone gel) to make it easier to insert it into the hole in the mower deck. Adjust the length of the cable casing by turning the barrel where the clutch cable meets the clutch handle assembly such that the clutch engages when the handle is pulled, and releases when the handle is released.
Removed the broken cable and threaded the new cable through the mower deck.
Some difficulty hooking the cable end to the drive box, very close quarters.
Adjusted the tension on the cable.
Tested the power drive.
Works great.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9982451
Manufacturer Part Number: 581952101
Lawn Mower
- Husqvarna Lawn Mower Model 96141028800 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
