Part Location Diagram of 560955001 Homelite Valve- Duckbill
See part C-12 in the diagram
( Grid squares measure 1x1 inch )

Valve- Duckbill 560955001

Manufactured by:
Homelite
ERP Number:
ERP9980272
Part Number:
560955001
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine replacement part manufactured for use with outdoor power equipment. The duckbill valve is a one-way valve allowing air into a fuel or oil tank to prevent a vacuum within the tank, also the valve prevents oil or fuel from backing up through the valve and leaking. There is a filter that is used with the valve to prevent contaminants from entering the fuel or oil tank. The filter varies depending on the model of equipment, please note the valve is sold individually.

Troubleshooting

This part works with the following brands:
  • Homelite
  • Ryobi
This part works with the following products:
  • Chainsaw
  • Trimmer
Part# 560955001 replaces these:
560955001,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Chain drive gear bad, oil line plugged

Michael from Milford, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Removed cover to chain
Removed drive gear clip and pull gear off
Drained oil tank
Flushed oil tank
Air blew out oil delivery line
Flush oil delivery line, brass filter and duck bill were fine; did not install. Kept those parts for another time.
Reassemble bar and chain and install cover.
Oiled added to oil tank.
Service completed
Did you find this story helpful?
Thank you for voting!

Auto oiler system did not work

Kenneth from DUBLIN, California

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
560955001
Needed to remover engine from split housing
Removed Oil tank
Removed Old bridle oil lines
Cleaned and rinsed oil tank
Installed (2) new oil lines
Installed new Duckbill valve
Installed oil tank and connected oil lines
Installed engine assembly in split housing
Secured all fasteners
Sta rted engine let warm up
Checked for Auto oiler operation
Did you find this story helpful?
Thank you for voting!

Duckbill valve was missing from fuel tank and chain oiler tank. Fuel tank was leaking through Duckbill valve hole. Oil tank would not hold pressure to auto oil the chain.

Jerry from MYRTLE BEACH, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
560955001
Removed chain saw cover (starter rope side) and exposed fuel and oil tank. Inserted Duckbill valve into existing hole in fuel tank. Finished...
Used a piece of wire to fish out the pressure line (the short one) from inside the oil tank. Using the tiny pipe fitting found in the bottom of the oil tank, (used when assembled at the fact ory), I assembled it together with the Duckbill valve and the oil line. Finished...
Reassembled side cover
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9980272
Manufacturer Part Number: 560955001
Brand Model Number Description
Homelite 540 Chainsaw - Chainsaw
Homelite D3300 Chainsaw - Chainsaw
Homelite GST Trimmer - String Trimmer
Homelite HBC18 Trimmer - String Trimmer
Homelite HBC30 Trimmer - String Trimmer
Homelite HBC30B Trimmer - String Trimmer
Homelite HGT Trimmer - String Trimmer
Homelite HLT17C Trimmer - String Trimmer
Homelite HLT18 Trimmer - String Trimmer
Homelite PS33 Chainsaw - Chainsaw
Ryobi RY10518 Chainsaw - 18 in. 46cc Chainsaw
Ryobi RY10519 Chainsaw - Chainsaw
Ryobi RY10519A Chainsaw - 46CC Chain Saw
Ryobi RY10519B Chainsaw - 46CC Chainsaw
Ryobi RY10520 Chainsaw - 20 in. 46cc Chainsaw
Ryobi RY10521 Chainsaw - Chainsaw
Ryobi RY10521A Chainsaw - 46CC Chain Saw
Ryobi RY10521B Chainsaw - 46CC Chainsaw
Ryobi RY5020 Chainsaw - 50cc Chain Saw
Homelite ST145 Trimmer - String Trimmer
Homelite ST155 Trimmer - String Trimmer
Homelite ST175 Trimmer - String Trimmer
Homelite ST185 Trimmer - String Trimmer
Homelite ST275 Trimmer - String Trimmer
Homelite ST385 Trimmer - String Trimmer
Homelite ST385BC Trimmer - String Trimmer
Homelite ST385C Trimmer - String Trimmer
Homelite SUPER2 Chainsaw - Chainsaw
Homelite UT-10532 Chainsaw - Chain Saw
Homelite UT-10687-B Chainsaw - 300 Chainsaw