After removing the pull starter unit, remove any rope left inside the winding wheel. Line up the two holes where the rope gets inserted into. Wind the wheel counterclockwise 4-5 times completely around(before inserting rope). Using a paper clip insert and temporarily twist and secure it into the winding wheel and case to prevent the whee
... Read morel from unwinding itself. Burn ends of rope to prevent undoing of rope. Insert the rope into the winding wheel and casing( use a paper clip to fish the rope through). Once the rope is through both holes, make a knot at the end of the rope on the winding wheel end. Pull the remaining loose rope out through the case hole. Insert and pull rope through starter handle and make knot at end of rope. Remove paper clip from winding wheel and case and allow for winding wheel to return itself slowly. If rope is too long, mark and pull enough rope out. Hold in place and make new knot without cutting excess yet. If satisfactory, cut remaining excess rope.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9938859
Manufacturer Part Number: 31-907
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1969)_WW_3.gif "Part Location Diagram of 31-907 Oregon Starter Handle")
(1969)_WW_3.gif "Part Location Diagram of 31-907 Oregon Starter Handle")
