Lawn Mower Cotter Pin 30X49MA

With some common sense and the assembly/parts diagrams that Replacement Parts provided made the job very simple. I was stumped a little and had to refer back to them while making the repairs. They are the same diagrams I used to order my parts. What I am about to say is hard to believe and almost extinct these days. The procedure to find ... Read more your replacement parts was very simple to follow. Ordering was simple. Payment options were simple. The shipment had plenty of choices as far as how fast you wanted or needed it. It arrived when it was supposed to. And here was the BIG surprise that FLOORED me, there\'s always a catch. EVERYTHING IN MY ORDER WAS CORRECT!!!!!!!! I will definitely give Replacement Parts all of my future business and HIGHLY recommend them, in fact, I already have. THANK YOU, Replacement Parts! I am mowing away!

1. Fetched run-a-way wheel.
2. Use hammer and flat-head screwdriver to tap out remaining broken wheel bearing.
3. Replace new wheel bearing, inside and outside of wheel.
4. Replace new washers (2 sizes).
5. Insert cotter pin.
6. Snap on hub cap.

1. Removed the old wheel. Easy -- just pull off the cotter pin and slide off the wheel.
2. Cleaned the grease out of the wheel where the old bearings were.
3. Placed the new bearings in the wheel, with lots of grease.
4. Slid the wheel and washers on the axle.
5. Put in the cotter pin.
6. Tapped on the hub c ... Read more ap.

Done in 10 minutes! Well worth the $30 for the parts.

had to replace cotter pins old ones broke off as well as bearings after jacking my tractor off the floor everything was easy to replace thanks.

Put wheel back on axle, put on both washers, inserted cotter pin and put on hub cap.