This is a manufacturer-sourced component which is designed for use with Homelite pressure washers. The purpose of the pump is to produce pressure in the air tank. Over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality pump is sold individually. To ensure the correct installation, check the appropriate diagrams of your model. You will need a wrench set to remove the old one and connect the new one. Make sure to drain the air from the tank before starting this repair.
Troubleshooting
This part works with the following brands:
Homelite
This part works with the following products:
Pressure Washer
★
Customer Part Reviews
?
4.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Pressure washer pump. Replacement
Arrived with pump broke thru the box , FedEx driver allowed me to look it over and it appeared ok. Once I go the old pump off, it was easy to install the new one. I started up my pressure washer all worked well and no leaks!!!
Thank you!
Guest - July 18, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Four bolts hold the pump to the engine. Removed these four bolts and pump separated from engine. Aligned keyway and key on engine crankshaft with pump. Slid pump onto crankshaft end and bolted new pump to engine. Insure the key does not fall out of the keyway while assembling. I put a little grease in the keyway to hold the key in pla
... Read morece during assembly.
Removed four bolts that hold the pump to the engine
Pulled on pump to remove it from the engine shaft
Lined up the key to the keyway and pressed the new pump on
Tightened the bolts to hold the new pump to the engine
Removed the thermal relief valve from the old pump and installed it on the new pump
Removed the four bolts holding the pump to the engine
Pull the pump from the engine and remove the key from the shaft
Put the key in the new pump shaft and line it up with the keyway in the engine shaft
Press the new pump onto the shaft and tighten the bolts
Install the thermal relief valve on the new pump
Removed the 4 bolts securing the pump to the motor, and slid off the pump from the motor shaft. Press the new pump onto the shaft lining up the key and the keyway in the shaft. Mad sure it was on all of the way, then tightened the 4 bolts.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9938075
Manufacturer Part Number: 308418007
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
