This is an original Subaru/Robin replacement part manufactured for use with small engines. O-rings can wear out over time, and become pitted, cracked, or misshaped. This packing chamber o-ring is used to seal the carburetor float body. It is recommended to replace the seal when servicing the carburetor to assure a good seal is created when reassembling the carburetor.
Subaru, small two cycle engine Carburetor repair.
Remove gas line from carburetor and drain fuel tank
Remove carburetor linkage from carburetor
Remove air filter housing
When you remove the two interior bolts from the air filter the carburetor will also be loose
Remove air cleaner and carburetor
Disse
... Read moremble Carburetor and spray parts with carburetor cleaner
Don\'t try to do a full soak in carb cleaner the carb is simple it just needs a flush
check all passages, use new gaskets, rope packing for the bowl and replace jets
Reassemble and Va room, thanks eReplacement parts, easy to read parts catalog and fast shipping.
Stephen K.
I removed the carb and replaced all the gaskets. The gaskets I had were worn.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
