1. Removed reservoir tank.
2. Remove tubing from pump and reservoir cap.
3. Removed brass fitting from pump.
4. Installed new parts into pump, (plastic sleeve, spring, metal ball).
5. Installed new brass fitting and connected tubing.
6. Installed reservoir, put on new cap and connected tubing.
1. Removed the injector fitting on the front of the pressure washer.
2. Disconnected the detergent feed line from the fitting.
3. Removed the worn ball check valve, the spring and the seat from the valve body.
4. Replaced the ball, the spring and the seat.
5. Installed the new brass fitting.
6. Reattached the
... Read more feed line.
Just follow the diagram in the package. Reassemble and viola, it works.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 2.883-862.0 Karcher Spare Part Set Chemistry")
_WW_2.gif "Part Location Diagram of 2.883-862.0 Karcher Spare Part Set Chemistry")
