Part Location Diagram of 168762-7 Makita Carbuertor
See part A-197 in the diagram
( Grid squares measure 1x1 inch )

Carbuertor 168762-7

Manufactured by:
Makita
ERP Number:
ERP9901204
Part Number:
168762-7
Original Equipment Manufacturer ?
$354.01
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

"This is a diaphragm type carburetor for your trimmer. It measures approximately 3.5-Inches long and 2-Inches wide. You'll need to replace this part of your trimmer if it is hard starting or running poorly. This is usually caused by fuel being left in the carburetor for too long. Most manufacturers recommend that fuel that is older than 30 days should not be used and should be disposed of. Leaving fuel in the carburetor can cause it to clog and malfunction. To access this part, you will first remove the cover and unscrew the bolts holding it in place. Next, clamp off the fuel lines and pull them away from the carburetor. "

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
Part# 168762-7 replaces these:
168591-8,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

bad carb on pole saw

Jimmie from Kaplan, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
removed old carb and installed new one
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9901204
Manufacturer Part Number: 168762-7
Brand Model Number Description
Makita CS-2464C Concrete Saw - 25.4cc 4-Stroke Couple Shaft Power Head
Makita CS-2464CBC Trimmer - 25.4cc 4-Stroke Couple Shaft String Trimmer
Makita EE2650H Trimmer - 25.4 Cc Mm4 4-Stroke Engine Edger
Makita EM2650LH Trimmer - 4-Stroke String Trimmer
Makita EM2650UH Trimmer - 25.4 Cc Mm4 4-Stroke Engine Brush Cutter
Makita EM2652LHN Trimmer - 25.4 Cc Mm4 4-Stroke Engine String Trimmer
Makita EN4950H Hedge Trimmer - 20-Inch 25.4 Cc Mm4 4-Stroke Engine Articulating Hedge Trimmer
Makita EN4951SH Hedge Trimmer - 20-Inch 25.4 Cc Mm4 4-Stroke Engine Short-Shaft Articulating Hedge Trimmer
Makita EN5550SH Hedge Trimmer - 22-Inch 25.4 Cc Mm4 Double-Sided Hedge Trimmer
Makita EN5950SH Hedge Trimmer - 24-Inch 25.4 Cc Mm4 4-Stroke Engine Double-Sided Hedge Trimmer
Makita EN7350SH Hedge Trimmer - 30-Inch 25.4 Cc Mm4 4-Stroke Engine Single-Sided Hedge Trimmer
Makita EX2650LH Trimmer - 25.4 Cc Mm4 4-Stroke Couple Shaft Power Head
Makita EY2650H25H Saw - 25.4 Cc Mm4 4-Stroke Engine Telescoping Pole Pruner
Makita ME2464 Saw - 25.4 Cc Mm4 4-Stroke Engine Telescoping Pole Pruner
Makita MH-2464DS Hedge Trimmer - 24-Inch 25.4 Cc Mm4 4-Stroke Engine Double-Sided Hedge Trimmer
Makita MS-2564 Trimmer - 25.4 Cc Mm4 4-Stroke Engine String Trimmer
Makita MS-2564C Trimmer - 25.4 Cc Mm4 4-Stroke Engine String Trimmer
Makita PE-2544 Trimmer - 25.4 Cc Mm4 4-Stroke Engine Edger