Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9893015-1-M-Honda-14410-Z1C-000-Rod- Push
Part Location Diagram of 14410-Z1C-000 Honda Rod- Push
See part B-4 in the diagram
9893015-1-S-Honda-14410-Z1C-000-Rod- Push 360 view
( Grid squares measure 1x1 inch )
9893015-1-S-Honda-14410-Z1C-000-Rod- Push 9893015-2-S-Honda-14410-Z1C-000-Rod- Push 9893015-3-S-Honda-14410-Z1C-000-Rod- Push 9893015-1-S-Honda-14410-Z1C-000-Rod- Push 360 view
Part Location Diagram of 14410-Z1C-000 Honda Rod- Push

Rod- Push 14410-Z1C-000

Manufactured by:
Honda
ERP Number:
ERP9893015
Part Number:
14410-Z1C-000
Original Equipment Manufacturer ?
$10.31
Special Order

Easy 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Engine
  • Generator
  • Snow Blower

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Stuck intake valve bent push rods and broke rocker arm. I had already pulled the head and removed the valve and cleaned the valve and valve guide while I was waiting for the parts to arrive.

Victor from San Antonio , Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Parts Used:
14431-ZE2-010, 14410-Z1C-000
Removed the fuel tank, starter rope assembly, removed the air shroud, removed the air filter assembly, removed carburetor, removed exhaust system, removed valve cover, removed rocker arm and push rods, removed cylinder head, removed valve from head and cleaned valve and guide, reassembled in opposite order, torqued all bolts and waited f or parts to arrive. Time spent around two hours. After parts arrived I installed the remaining push rod and rocker arm, set valve clearance and installed the valve cover. Engine started on the second pull of the starter rope.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9893015
Manufacturer Part Number: 14410-Z1C-000
Brand Model Number Description
Honda EB3800X Generator - Generator
Honda EB4000X Generator - Generator
Honda EB5000I Generator - Generator
Honda EB5000XK2 Generator - Generator
Honda EB5000XK3 Generator - Generator
Honda EB6500X Generator - Generator
Honda EB6500X1 Generator - Generator
Honda EB6500XAT Generator - Honda Generator Model EB6500XAT Parts
Honda EB7000I Generator - Generator
Honda EG5000CL Generator - Generator
Honda EG6500CL Generator - Generator
Honda EM3800SX Generator - Generator
Honda EM4000SX Generator - Generator
Honda EM5000IS Generator - Generator
Honda EM5000IS1 Generator - Generator
Honda EM5000SXK2 Generator - Generator
Honda EM5000SXK3 Generator - Generator
Honda EM6500SXK1 Generator - Generator
Honda EM6500SXK1AT Generator - Honda Generator Model EM6500SXK1AT Parts
Honda EM6500SXK2 Generator - Generator
Honda EM7000IS Generator - Generator
Honda EU6500IS Generator - Generator
Honda EU6500IS1 Generator - Generator
Honda EU6500IS1AT Generator - Generator
Honda EU7000ISN Generator - Generator
Honda GX340RT1 Engine - Small Engine
Honda GX340RT2 Engine - Engine
Honda GX340RT2X Engine - Gx340rt2x Vws1 Gcbet-2000001-9999999
Honda GX340UT1 Engine - Small Engine
Honda GX340UT2 Engine - Gx340ut2 Qap2 Gcbet-1000001-1999999
Rod- Push
$ 10.31
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖