The throttle shaft is made out of metal. This part is available individually. It is an OEM from Kohler for use in engines. When replacing this part a screwdriver, a socket set, and a wrench set might all be needed. Over time this part may break and will need to be replaced.
Troubleshooting
This part works with the following brands:
Kohler
Exmark
This part works with the following products:
Engine
Lawn Mower
Part# 1214409-S replaces these:
12 144 09-S,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
25+ year old Troy Bilt lawn tractor with Kohler engine. Throttle shaft seal worn off, linkage tab broken off, & throttle shaft was so worn that it was surrounded with brass dust. It would no longer
1. Removed air cleaner.
2. Removed air cleaner box from the carb.
3. Removed choke & throttle linkages from choke & throttle
4. Removed carb body. This took a little tugging, twisting because the gasket was stuck to both the carb body & intake port. Scraped old gasket of both surfaces.
5. Removed butterfly from
... Read morethrottle shaft.
6. Replaced throttle shaft & seal; reinstalled butterfly on shaft.
7. Installed new gasket. I like to use a thin film of grease on gaskets but maybe that\'s just me.
8. Repeated steps 4-3-2-1 using \"replace\" instead of \"removed\".
I thought my chances of getting replacement parts for an engine this old were about zero. Thanks to eReplacementParts, this old Kohler is running like a top! (It helps, too, that it\'s a Kohler.)
Read less
Did you find this story helpful?
Thank you for voting!
Carburetor throttle shaft lever broke free of the original throttle shaft
On a Kohler CH14S engine:
Remove air cleaner assembly.
Remove carburetor nuts and carburetor.
Remove 2 small screws from throttle plate.
Remove old throttle shaft from carburetor.
Install new seal just under new throttle shaft lever.
Install new throttle shaft in carburetor.
Install throttle plate
... Read more and use blue loctite on throttle shaft plate screws.
Re-install carburetor.
Re-install air cleaner assembly.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
