Part Location Diagram of 117-8775 Lawn Boy Rotor Assy
See part A-5 in the diagram
( Grid squares measure 1x1 inch )

Rotor Assy 117-8775

Manufactured by:
Lawn Boy
ERP Number:
ERP9882873
Part Number:
117-8775
Original Equipment Manufacturer ?
$55.66
On Order

Easy 

15 - 30 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is an authentic item that is supplied by the original equipment manufacturer. This component is made for use with Toro and Lawn Boy snowblowers. The purpose of this rotor assembly is to shovel the snow. It is an identical replacement for a faulty or a missing component that was installed on a new unit. Make sure to check the owners manual and the appropriate diagrams of your model for the correct installation of this assembly. Keep in mind it is made of durable metal and is sold individually. To perform this repair, you will need to remove the side plate, remove the pin that secures the old rotor. This will allow you to replace the old rotor with the new one.

Troubleshooting

This part works with the following brands:
  • Lawn Boy
  • Toro
This part works with the following products:
  • Snow Blower

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Ran over a rock with my snow blower! Totally destroyed my rotor

John from Twin Lakes, Colorado

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
117-8775
1. Removed the right side access panel
2. Removed the retainer bolt from the center hub
3. Wiggled the rotar out
4. Wiggled the new rotar in
5. Replaced the access panel
6. Easy easy easy
Did you find this story helpful?
Thank you for voting!

Snowblower plastic rotor broke

Denzil from CEDAR CREST, New Mexico

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
117-8775
After initially receiving the wrong rotor assembly due to mistaken labeling I received the correct part on the second try. Then:
1. Removed the end plate by removing 4 screws
2. Removed the bottom scraper by removing 3 screws
3. Removed center bearing bolt that held one end of the rotor
4. Wedged the broken ro tor out of the snowblower housing
5. Lined up the new rotor on the drive (shaped like a cross) and wedged the rotor into the snowblower housing.
6. Replaced the center bearing bolt holding the rotor in place.
7. Replaced the bottom scraper and end plate by reinstalling the 7 screws
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9882873
Manufacturer Part Number: 117-8775
Brand Model Number Description
Lawn Boy 38302 Snow Blower - 1800 18-Inch Power Curve Snow Thrower
Lawn Boy 38303 Snow Blower - 1800 18-Inch Power Curve Snow Thrower
Lawn Boy 38381 Snow Blower - 1800 Power Curve Snowblower