This replacement carburetor assembly is a high quality item that is designed for use with Homelite pressure washers. The purpose of this part is to mix gas and air before the fuel mix goes into the engine. You can tell that something is up with the carburetor if the engine runs poorly, surges, or flat-out won't run at all. Please note one durable metal body carburetor with a rubber primer bulb is included per order.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
My Go-To company for parts.
As usual the people are great and the parts are right.
Guest - April 30, 2019
Verified Purchase
★★★★★
★★★★★
Easy Repair
Exactly the right part, works good
Guest - November 5, 2019
Verified Purchase
★★★★★
★★★★★
Precisely the part I wantedI
Sometimes a carb rebuild kit is appropriate, but sometimes a replacement carb is required. That was my situation & I found the item here, at a fair price, with a not-difficult-to-navigate online ordering process, timely shipping, great customer service, Well done!
Guest - March 19, 2022
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
1- 2 hours
(4 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
After sitting unused for a year, engine would not start
1. Drain gas tank.
2. Remove float bowl at bottom of carburetor with 10mm wrench.
3. Remove brass fuel jet from inside carburetor with flat bladed screwdriver.
4. Clear clogged jet orifices with fishing line as not to damage them
Reassemble.
Fixed! (I didn\'t need to replace the carburetor, I\'ll keep it for
... Read moreanother repair.)
Read less
Did you find this story helpful?
Thank you for voting!
Fuel leak in the carburator assembly.
Joseph from Hayes, Virginia
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Empty the fuel tank of all fuel.
2. Removed fuel tank from the pressure washer motor and disconnect the fuel line.
3. Disassembled the pressure washer from the base and frame to allow access to the carburetor.
4. Removed air cleaner and base.
5. Disconnect linkage and spring from carburetor assembly.
6. Un
... Read morebolted the carburetor assembly and removed the seal plate.
7. Removed the old carburetor.
8. Attached new carburetor with fuel line attached..
9. Re-attached linkage and spring to carburetor
10. Reattached fuel line to fuel tank, making sure it was clear of the linkage and spring.
11. Reattached the fuel tank.
12. Remounted the pressure washer and motor on frame.
13. Refilled the fuel tank and looked for any leaks as I opened the fuel line valve.
14. Started the unit using the standard start-up procedure recommended by owner\'s manual.
COMMENT: On this unit it would be VERY simple to change the carburetor, if it wasn\'t for the frame and it is best to order several fuel lines, since they seem to deteriorate quickly with ethanol based fuel. I have switched to 100% gasoline. It is more expensive, but the engine seems to do better for longer.
Remove gas tank and flush out oil remove engine from frame. Disconnect choke and spring. Remove and replace carburetor. Reassemble. Tha replacement carburetor was a perfect match.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9873378
Manufacturer Part Number: 099980551032
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
