This is an authentic OEM sourced replacement part. This special fuel pipe assembly is used to deliver gasoline from the tank to the carburetor. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is made out of flexible plastic and it is sold individually. Please note, clips, joints and the fuel filter are all sold separately.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts fit
The right part all the time.
Brian - July 31, 2019
Verified Purchase
★★★★★
★★★★★
Simple fix to an annoying issue.
Rather than replace the entire tank assembly this tube solved the issue. The fuel feed line had broken after 22 years of use. Easy fix. Works great.
Guest - August 26, 2020
Verified Purchase
★★★★★
★★★★★
Exact Replacement Part
Perfect replacement. Fast shipping.
Guest - July 5, 2021
Verified Purchase
★★★★★
★★★★★
Easy
Arrived on time - weed eater is now fixed!
Guest - March 4, 2022
Verified Purchase
★★★★★
★★★★★
Easy fix very happy with the parts !
Parts came quickly and were in perfect condition and the repair of my brush cutter was pretty easy I’ll be ordering more parts as soon as I need something thank you !!!
Anonymous - June 27, 2022
Verified Purchase
★★★★★
★★★★★
Works again
The part was just what I needed and my trimmer is working great, it even came a day early.
Guest - May 12, 2023
Verified Purchase
★★★★★
★★★★★
p230 pole saw fuel tube
factory part ,fit perfect, fast shipping!
Guest - November 18, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Use your phone to take a photo of the line connections for reference before disassembly. When removing lines be careful not to lose any of the tiny compression rings. Use the photo that you took to ensure that you have reconnected everything properly.
NOTE: These instructions are for a 22 year old Shindaiwa T230 trimmer. All parts were an exact fit.
1 Remove and clean fuel tank shield from trimmer.
2 Remove and clean fuel tank from trimmer.
3 Disconnect fuel lines from carburetor. (Note position of 3 fuel lines)
4 Remove fuel pipe assembly from fuel tan
... Read morek (It\'s a force fit in the fuel tank opening.).
5 Install fuel tank vent line and fuel filter on fuel pipe assembly.
6 Coat the surface of fuel pipe assembly that slips into fuel tank opening with light coating of silicon grease.
7 Press fuel pipe assembly into position in fuel tank opening.
8 Connect fuel lines to carburetor and fuel tank vent.
9 Install fuel tank and fuel tank shield on trimmer.
10 Prime per manufacturer\'s instructions and trimmer started on second pull.
Removed the shaft from the engine, air filter, plug cover and clutch shroud, fuel tank and cleaned all the parts. Replaced cracked fuel lines and pipe assy, with fuel filter and breather. Replaced clutch and spark plug. Checked air gap at mag/coil and lubed shaft end splines and greased the head.
Keeping the cooling fins clean after
... Read more each use is important to prevent overheating.
Using J shaped piece of wire to remove old fuel filter prior to removing damaged fuel pipe assembly. Replaced fuel pipe assembly. Attached fuel filter. Filled tank. Started machine. It ran perfectly. Super easy!
Did you find this story helpful?
Thank you for voting!
Fuel pipe assy tube tore off the grommet inside fuel tank
1. Remove top cover of motor with allen wrench.
2. Remove wire pinch clamps around old Fuel pipe assy tubes (3) pop out grommet.
3. Put Filter on w/clamp + install other 2 tubes, Plug grommet assy into fuel tank.
4. Reinstall Top Cover and your done...
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/trimmer/hoses-and-tubes/"},{"position":2,"name":"V470001210","title":"V470001210","url":""}]
