Part Location Diagram of P022001091 Echo Repair Kit
See part E-23 in the diagram
Replacing your Echo Trimmer Repair Kit
( Grid squares measure 1x1 inch )

Repair Kit P022001091

Manufactured by:
Echo
ERP Number:
ERP9321903
Part Number:
P022001091
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(10 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a repair kit for various models of trimmers to fix the line holding kit within the trimmer head. The parts within this kit allow the line, or string, within a trimmer to slowly feed out while the trimmer is in use, to provide the user with further line to cut weeds and other vegetation. Over time, the parts within this kit, such as the pawls and springs, can wear out and will no longer hold the trimmer line and must be replaced. This kit includes 3 springs, 6 screws, 3 pawls and 3 hinge pins. Due to the high-use nature of these parts, replacing them more frequently may be required. • If you notice that the line is not being held within the trimmer head or gets stuck, it needs to be replaced immediately. Replacing these parts requires an Allen key, a wrench, a pair of pliers, and a flathead screwdriver.

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Trimmer

Videos For installing this part.

?
Replacing your Repair Kit

Customer Part Reviews

?
4.2
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(10 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Trimmer head was missing some parts.

David from Mitchells, Virginia

12 of 12 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench set
Removed the head from trimmer using 9/16 socket. Disassembled the head using a Torx driver, careful not to loose any of the jaws and springs in the head that hold the cutting line in place. Replaced two of the jaws and springs in the head, have to pay attention to the direction of the teeth on the jaws when installing them to insure that the teeth hold the string securely, and string doesn\'t fly out when the trimmer is running. And look to see how the springs are installed. Reassemble head, attach the head to the trimmer, put new string in the head, and the trimmer is ready to go.
Did you find this story helpful?
Thank you for voting!

The holder of the string would not hold the cutting string

Gary from Tyler, Texas

12 of 12 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
P022001091
Simple, take your time. Works great. Better to fix than change to a different type off string holder.
Did you find this story helpful?
Thank you for voting!

Stripped string retaining cogs.

Donald from FLEMING ISLAND, Florida

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
P022001091
Simply removed old cogs and replaced it with the new ones.
Did you find this story helpful?
Thank you for voting!

Parts worn

Robert from Inverness, Florida

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
P022001091
Removed trimmer head removed gripper teeth cleaned area with compressed air lubed shaft installed new gripper assembled trimmer head installed new string and tested it on some weeds
Worked great
Did you find this story helpful?
Thank you for voting!

weed whacker would not hold 1 of 2 pre-cut strings

Nicoals from San Jose, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
P022001091
removed trimmer head,
removed four retaining screws on bottom of trimmer head
removed two trimmer line retention wedges and springs
installed two new retention wedges with new springs
reassembled trimmer head
reinstalled trimmer had on trimmer shaft
job completed
Did you find this story helpful?
Thank you for voting!

Trimmer head line holder missing

Ronnie from HARKER HEIGHTS, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
P022001091
Removed screws from top of trimmer head
Put new parts in
Locked spring in with jewelers screwdriver
Replaced cover and 4 screws
Inserted new trimmer line
Did you find this story helpful?
Thank you for voting!

String repeatedly coming out of trimmer head

David from Chickamauga, Georgia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
P022001091
Separated trimmer head to get at spring and holding teeth and replaced them.
Did you find this story helpful?
Thank you for voting!

Would no longer hold the trimmer line

jon from mishawaka, Indiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
P022001091
1. Removed the head from the trimmer.
2. Removed the screws on the top side of the head.
3. Removed old parts.
4. Washed all the plastic head components in the kitchen sink.
5. Reverse order of 1,2 and 3(with new parts).
Did you find this story helpful?
Thank you for voting!

Lost the small parts

Mario from Elmwood Park, Illinois

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
P022001091
Just removed the bottom housing where the string is and replaced the parts.
Did you find this story helpful?
Thank you for voting!

String getting stuck inside of trimmer head

Alan from Paradise, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
P022001091
Removed string head / opened to replace post, spring and string gear / reassembled & test OK.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9321903
Manufacturer Part Number: P022001091
Brand Model Number Description
Echo 21560056 Chainsaw - 2-line Rapid Loader Trimmer Head
Echo 21560059 Chainsaw - 2-line Rapid Loader Head - Universal
Echo 99944200221 Chainsaw - 3-line Rapid Loader Head
Echo 99944200610 Trimmer - Rapid Loader Trimmer Attachment
Echo 99944200615 Trimmer - Curved Shaft Trimmer Attachment
Echo GT-2000EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-2000R Trimmer - Curved Shaft Grass Trimmer
Echo GT-200EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-200I Trimmer - Curved Shaft Grass Trimmer
Echo GT-200R Trimmer - Curved Shaft Grass Trimmer
Echo GT-201 Trimmer - Curved Shaft Grass Trimmer
Echo GT-201EZR Trimmer - Curved Shaft Grass Trimmer
Echo GT-201I Trimmer - Curved Shaft Grass Trimmer
Echo GT-201R Trimmer - Curved Shaft Grass Trimmer
Echo GT-225 Trimmer - 21.2 cc Curved Shaft Trimmer
Echo GT-225I Trimmer - 21.2 cc Curved Shaft Trimmer
Echo GT-251E Trimmer - Trimmer
Echo PAS-225 Trimmer - Gas Power Source Attachement
Echo PAS-230 Trimmer - Gas Power Source Attachement
Echo PAS-266 Trimmer - Gas Power Source Attachement
Echo PAS-280 Trimmer - Pro Attachement Series
Echo SRM-210i Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-211i Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-3100S Brush Cutter - Srm-3100s Type 1