This is a genuine OEM sourced replacement part flywheel fan. It is specially manufactured for use with Briggs and Stratton engines that are installed on lawn and garden equipment. This fan is attached to the fly wheel and it will help to keep the engine cool for optimum performance. This blower fan is made out of plastic and it is sold individually. Please note the bolt used to secure this fan is sold separately. To complete this repair you will need a screwdriver and a wrench.
Had to install two threaded positioning pins in the top of the flywheel. The threaded holes for the pin were already there even though there were no positioning pins with the original flywheel fan. then had to drill 1/2\" holes in the fan for the head of the positioning pins to fit in. There were dimples in the fan at the location where t
... Read morehe 1/2\" holes were to be drilled. Once the holes were drilled it was just a matter of installing the fan and debri screen in the reverse order of removing the old fan and screen, making sure that a cutout on the bottom of the fan was located over the magneto magnet on the flywheel. Then reinstalled the plastic shroud over the overall assembly. Everything worked fine.
I was putting the shroud on the engine after some carb work, but missed one locator guide. On the oil stick assembly, there\'s a little wing that has to go in a guide on the shroud. I missed that one. When I started it up, the wing broke off nearly all the air fins on the original flywheel. The only thing hard about the repair was to get
... Read morethe shroud to line up with all the guides before buttoning it down.
Remove air filter
Remove 4 bolts and 1 screw on the blower housing
Remove he blower housing
While holding the flywheel with a strap wrench or flywheel wrench remove the flywheel bolt
Remove the old fan and replace it with the new one
Replace the flywheel bolt and torque to 140 ft/lbs ( check specs for your s
... Read morepecific engine )
Replace blower housing
Check to insure nothing will hit the new fan
Replace bolts and screws
Replace air filter
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
