It is an authentic manufacturer-sourced part which is specially made for Poulan and Husqvarna chainsaws. The part is utilized on a chainsaw to to adjust the blade to the correct tension. A correctly adjusted chainsaw blade will last longer and cut better. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Keep in mind this high-quality pin-bar adjust is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. NOTE: Here is the link to our article on <u><a href="http://www.ereplacementparts.com/article/4100/How_to_Tighten_a_Chainsaw_Chain.html">How to Tighten a Chainsaw Chain </u></a>
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts
The parts were perfect but it took way too long to receive them, like they were on a slow boat from China!
Guest - June 5, 2020
Verified Purchase
★★★★★
★★★★★
Very easy repair!
The part was delivered quickly despite the current Covid-19 situation and customer service is extremely helpful with follow up To ensure all went well! Will buy again here and recommend this site!
Guest - July 22, 2020
Verified Purchase
★★★★★
★★★★★
perfect
thanks
Guest - June 8, 2021
Verified Purchase
★★★★★
★★★★★
Great service!!!!!!!!
Fit perfect!!!
Anonymous - July 5, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replaced the pin that tensions the chain bar, simply removed the cover that has the tension knob attached to it, remove the gear with the screw and pin adjustment on it.
Unscrew the broken pin adjustment and replace with the new one.
Caution: Be sure you check for the correct pin with your model chainsaw as one size does not f
... Read moreit all.
Removed chain & bar from saw
Removed adjuster from saw and disassembled.
Removed and replaced Pin Bar adjust
Reassembled saw. Tested to make sure the new parts worked.
Adjusted chain tension, tightened bolts & nuts as required.
Checked chain oil level, and fuel supply.
Rechecked chain tension.
Took old parts out, installed the new pin bar adjust and wheel gear. The new gear was so much better than the old as it had metal opposed to a fiber mesh part. Also the wheel itself was far better because of it being so much easier to turn. The way its made makes it easier to get a hold of to turn it.Completely satisfied customer.Steve L
... Read more.
1) Remove cover
2) Replaced gear
3) Put a little grease on the gears
4) Put cover back on
** Toughest part was getting the pin bar adjust to line up with the bar and get cover back on.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9289242
Manufacturer Part Number: 545060502
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_3.gif "Part Location Diagram of 545060502 Husqvarna PIN, BAR ADJUSTING")
_WW_3.gif "Part Location Diagram of 545060502 Husqvarna PIN, BAR ADJUSTING")
