This authentic replacement part is specially designed for Briggs and Stratton generators. It is supplied from the original equipment manufacturer. This is an important component of the unit which regulates the voltage. Over time it may develop electrical or mechanical issues eventually requiring a replacement. This high-quality component is sold as an individual item. Make sure to refer to the owners manual and the diagrams of your model for the exact location and the correct application of this regulator. You will need a screwdriver and a wrench set to remove the housing in order to perform this repair.
Troubleshooting
This part works with the following brands:
Briggs and Stratton
Troy-Bilt
Craftsman
Snapper
Husqvarna
This part works with the following products:
Generator
Part# 205858GS replaces these:
205858GS,
★
Customer Part Reviews
?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Excellent service
Part was OEM and worked great.
Sales lady was excellent in helping me figure out what I needed and finding the part. I will definitely be back.
Guest - November 9, 2019
Verified Purchase
★★★★★
★★★★★
very easy repair and so far good part. Very good instructions.
arrived quickly, great part and instructions very precise. Would buy it again.
Guest - June 25, 2020
Verified Purchase
★★★★★
★★★★★
fast shipping, part is correct one.
Part fit correctly and had good instructions with pictures
Bob - September 1, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair great parts- works!!!
Excellent !!!!Generator Works!!!
Guest - September 19, 2020
Verified Purchase
★★★★★
★★★★★
Portable generator
Fit perfect.
Package arrived in reasonable time.
Price was a little bit more then expecting.
Over all I'm happy.
Fixed my generator.
Guest - January 20, 2023
Verified Purchase
★★★★★
★★★★★
Ram mirror.
Received on schedule, not damaged but poorly packaged the box was in rough shape.
John - September 6, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove rear of generator by unscrewing four nuts, remove cover, remover controller, remove wires and reconnect to new controller once completed wrap wires around board as you found on the old board. Refit and replace covers. Have all the power I need now. Thank you.
Did you find this story helpful?
Thank you for voting!
No power output on customer\'s John Deere 6200 portable generator
1. Check for power output at receptacles (No go)
2. R&R end cover & generator end plate. Clean slip rings on rotor. Check brushes for proper contact.
3. Check for min. AC output from rotor and stator while running. (OK)
4. Replace AVR. Check for generator output. (No go)
5. Disconnect + and - leads from brush block
... Read more. Start generator and flash rotor with 12vdc.
6. Re-connect brush leads and re-start. Check for output. (OK!)
NOTE: On this type of AVR *always* make sure all leads go to the proper terminals. The AC voltage sense and AC input to the AVR are different size terminals, but it is still possible to get the individual leads mixed up and the generator won\'t put out at governed speed. Be sure to follow the instruction sheet exactly on the positions of the voltage sense & AC input wires to the AVR! (The wires have numbers printed on the insulation)
1. Unbolted wired end of generator end housing from frame.
2. Removed four long screws holding the end housing to the rest of the generator assembly
3. Used lever to raise the generator housing (and generator up to clear the frame).
4. Removed housing from the stator/rotor assembly
5. Followed the attached instruct
... Read moreion sheet for the voltage regulator
5a. Discarding the \"booster\" previously undefined by the manufacturer. Part of the sheet instructions.
6. Reassembled in the reverse order.
7. Tested = OK
1 Removed generator end cover.
2 Transfer wires one at a time to new AVR.
3 Slide AVR in slot.
4 Remove old brush leads .
5 Add new brush leads.
6 Put cover back on,
7 Test for voltage..
1. Removed generator cap using 8mm socket set
2. Removed and replaced old AVR and brush assembly
3. Followed included instructions to remagnetize brush assembly by using small alligator 4. Clip jumper cables (not included) to connect positive and negative leads of brushes to a positive and negative posts of a 12 V battery (not
... Read more included).
5. Started and ran the generator for a few seconds.
6. Removed jumper cables.
7. Reconnected lead wires.
8. Re-installed the cap.
9. Started generator and now works as good as new!
Replaced the old parts with the new ones followed instructions that came with the parts . All went well generator now puts out electricity problem fixed. Advice take photo of wiring so everything go\'s back the same way. Reair was very easy.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Generator","title":"Generator","url":"/parts/power-tool/generator/"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/parts/power-tool/generator/circuit-boards-and-touch-pads/"},{"position":3,"name":"205858GS","title":"205858GS","url":""}]
