Part Location Diagram of 00068800 Ariens Ariens L3 Lube- 8 Oz Bottle
See part E-32 in the diagram
( Grid squares measure 1x1 inch )

Ariens L3 Lube- 8 Oz Bottle 00068800

Manufactured by:
Ariens
ERP Number:
ERP9247458
Part Number:
00068800
Original Equipment Manufacturer ?
$26.85
On Order

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This L-3 synthetic severe-duty gear lube is specially produced for use on Ariens snow blowers. It is used to lubricate gearbox gears that help to drive the unit. This is an authentic OEM sourced item that is sold individually.

Troubleshooting

This part works with the following brands:
  • Ariens
This part works with the following products:
  • Snow Blower
  • Tiller
  • Lawn Tractor

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Normal maintenance

Bill from Bowie, Maryland

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
00979807, 00068800
Drained and replace oil and added grease .
Did you find this story helpful?
Thank you for voting!

worm gear stripped out.

charles from WAUPACA, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Parts Used:
00068800, 52100900
removed auger and impeller. split housing of worm gear. put old shaft in press to remove impeller. reinstalled parts.
Did you find this story helpful?
Thank you for voting!

Maintenance.

Gary from Valley Stream, New York

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Parts Used:
00068800, 07015800
Changed gear case oil. Installed pin in wheel lock.
Did you find this story helpful?
Thank you for voting!

Worm shaft and gear had teeth missing.

John from BILLERICA, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Separate blower unit from motor unit.
2. Remove auger unit from blower housing.
3. Separate rakes, auger, bearings, and shafts. This was difficult due to lack of maintenance. Most parts were rusted and seized together. If the parts were free to to disassemble it would be a 1 to 3 hour job. Freeing the parts added another 3 hours to the job.
4. Reassemble adjust and test.
Note, it might save time and money to buy the auger and replace with the shaft than trying to free the parts without damaging the auger.
Did you find this story helpful?
Thank you for voting!
  • 1