Part Location Diagram of V470001190 Shindaiwa Fuel Tube-tank
See part I-8 in the diagram
( Grid squares measure 1x1 inch )

Fuel Tube-tank V470001190

Manufactured by:
Shindaiwa
ERP Number:
ERP9238667
Part Number:
V470001190
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This replacement fuel pipe is a high-quality OEM sourced component which is specially designed for use with Shindaiwa hedge trimmers. The purpose of this tube is to deliver the fuel from the tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line which is sold separately. Over time fuel pipes tend to become brittle and may crack eventually requiring replacement, please note this durable plastic item is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Shindaiwa
This part works with the following products:
  • Hedge Trimmer

Customer Part Reviews

?
4.5
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Had to rebuild carburetor and install new fuel lines.

Joe from ROCK HILL, South Carolina

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Rebuilt carburetor and replaced fuel lines and fuel filter.
Did you find this story helpful?
Thank you for voting!

Leaking fuel, hard to restart when hot.

Allan from TACOMA, Washington

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Removed old gas cap. Removed 4 screws holding handle, to get to screws holding gas tank, removed gas tank. Removed fuel tube and filter from gas tank. Removed 2 fuel lines from carb. Removed 4 screws holding primer bulb.Installed all new parts. No leaks,starts fine when hot.
Did you find this story helpful?
Thank you for voting!

Fuel leak

Andre from Princeton, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
I removed the old tank grommet and fuel lines and replaced them with the new parts.
Did you find this story helpful?
Thank you for voting!
  • 1