This is an authentic manufacturer-sourced component which is specially designed for use with Shindaiwa backpack blowers. It is utilized to provide a tight seal between the intake insulator and the heat deflector. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Refer to the owners manual and the diagrams of your model for the correct installation of this part. Note, it is made of high-quality composite material and is sold individually. You will need a screwdriver to remove the screws that hold the insulator in order to replace this gasket.
Troubleshooting
This part works with the following brands:
Shindaiwa
This part works with the following products:
Leaf Blower / Vacuum
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
1- 2 hours
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Salvaging a new blower that someone had ruined and put out in the trash
I found this blower out with the trash at one of my neighbors. Cosmetically it looked almost brand new - but the engine was seized probably as a result of using straight gas. I took it completely apart (every screw/every nut) as a learning exercise and determined to fix it once I found out the retail price of a new blower.
T
... Read morehe piston and cylinder were completely wrecked. It looked like part of a piston ring had gotten caught up on the edge of an exhaust port and there was metal everywhere except where it should be. A new cylinder is expensive, and I balked at paying for a complete cylinder/piston assembly so the effort languished. Luck would have it-I found TWO of the same machine lying on the side of the road a few weeks later. These were much older and pretty wrecked and missing most of the plastic parts. I took those apart and was able to salvage the cylinder from one which was worn but not too bad.
I had three examples of what happens when you don\'t take care of these machines - a rogues gallery of various forms of piston damage.
I ordered the piston ring set from ereplacementparts, along with a few gaskets. Actually being so new the gaskets on the unit were in OK shape except for the cylinder head gasket which fell apart as I removed the original.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9235234
Manufacturer Part Number: V103000630
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
