Wheel Asm 98-7130
- Manufactured by:
- Toro
- ERP Number:
- ERP9189143
- Part Number:
- 98-7130
Does this part fit my model?
Need help finding your model number?Jump to:
Product Description
?This wheel assembly is a genuine Toro part, it is not an aftermarket imitation. It is a high quality item designed for walk-behind lawn mowers. This wheel helps to support and move the mower around. This wheel assembly is made from durable plastic material and it is sold individually. Please note, the hardware to secure this wheel is sold separately. To complete this repair you will need a wrench.
Frequently Purchased Together
?Troubleshooting
- Toro
- Lawn Mower
Customer Part Reviews
?- < Prev
- 1
- Next >


Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Ask our experts a question about this part and we'll get back to you as soon as possible!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hello Betty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 98-7130. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Tires were worn out and spring was broken on the drive engagement lever.
Roderick from Lansdale, Pennsylvania
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
2. Cleaned the rear drive gears and lubricated gears with bearing grease
3. Removed cables from the mower handle.
4. Slid the drive handle forward over the stops located at the bottom of the handle. This allowed removal of the engagement bar and installation of the new spring on the safety ... Read more bar.
5. The slide must be aligned with the bar during assembly when the slide is returned to the installed position.
6. Connect the cables to their original connection points.
7. Start the mower and check operation of drive wheels and safety shut down.
Worn wheels and blade
Kim from Blue Mounds, Wisconsin
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
- Parts Used:
- 133-8183-03, 98-7135, 98-7130
Install the new wheels and tighten the bolts
Remove the blade bolt washer and the accelerator blade, then the blade
Install the parts in reverse order
Tires tread was gone
Jim from CHEYENNE, Wyoming
wheels worn out .. little or not tread remained
James from CHATTANOOGA, Tennessee
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set, Wrench set
- Parts Used:
- 98-7130
Plastic wheel rims broke causing wheels to wobble
Kenneth from MILFORD, Connecticut
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
- Parts Used:
- 98-7130
All 4 wheel (16 yrs use) were cracked, bald and mostly worn out
James from Crest Hill , Illinois
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
2) Installed new wheel assembly, (be aware the mounting boltÆs nut will fall from its location). I used a small piece of foam rubber to hold it in place.
3) Repeat for the other front wheel assembly.
4) Remove one rear wheel assembly. Again as with the front wheels, assure the nut sta ... Read more ys put when taking the bolt out.
5) Using a parts brush and brake cleaning spray, clean all the old grease, grass, dirt or anything else from the grease zerk, drive gear and plastic grease housing and its bushing.
6) Apply a small amount of grease directly to the drive gear, put the bushing into its plastic housing, and install the wheel assembly.
7) Be sure to grease both new assemblies once installed.
8) Be amazed at the fact that we can be so accustomed to worn parts until those are replaced with new parts.
9) Hope this helps...
All four wheels worn
Alan from CHERRY HILL, New Jersey
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Slide the old wheel off
Slide the new wheel on
Tighten the bolt on to the wheel
On the geared wheels make sure the gears line up with the pinion gear.
Front wheels of my Toro mower were very worn, torn in places.
Pat from CLOVIS, California
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
- Parts Used:
- 98-7130
Wheels were very worn
Denis from Fort Collins , Colorado
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 98-7130
| Brand | Model Number | Description |
|---|---|---|
| Toro | 20030 | Lawn Mower - Lawn Mower |
| Toro | 20033 | Lawn Mower - Lawn Mower |
| Toro | 20036 | Lawn Mower - Lawn Mower |
| Toro | 20037 | Lawn Mower - Lawn Mower |
| Toro | 20038 | Lawn Mower - Lawn Mower |
| Toro | 20039 | Lawn Mower - Lawn Mower |
| Toro | 20040 | Lawn Mower - Lawn Mower |
| Toro | 20042 | Lawn Mower - Lawn Mower |
| Toro | 20043 | Lawn Mower - Lawn Mower |
| Toro | 20044 | Lawn Mower - Lawn Mower |
| Toro | 20045 | Lawn Mower - Lawn Mower |
| Toro | 20046 | Lawn Mower - Lawn Mower |
| Toro | 20048 | Lawn Mower - Lawn Mower |
| Toro | 20450 | Lawn Mower - Lawn Mower |
| Toro | 20486 | Lawn Mower - Lawn Mower |
| Toro | 20487 | Lawn Mower - Lawn Mower |
| Toro | 20488 | Lawn Mower - Lawn Mower |
| Toro | 20489 | Lawn Mower - Lawn Mower |
| Toro | 20490 | Lawn Mower - Lawn Mower |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.