Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Quick and easy
Shipping was quick, the pulley was new in the bag and it even included the nut. My original was undamaged, but it was nice to put the new one on for a completely fresh install.
Guest - June 7, 2019
Verified Purchase
★★★★★
★★★★★
fast shipping
prefit fit and quick shipping
Guest - March 16, 2020
Verified Purchase
★★★★★
★★★★★
Lawnmower parts pulley and spline nuts were perfect fit
All parts arrived in time and were shipped fast and all fit perfectly thanks
Guest - July 20, 2020
Verified Purchase
★★★★★
★★★★★
Easy to repair if you follow this tip
The repair was easy to accomplish once I followed this step. I had to loosen the 4 bolts that attach the transmission to the chassis to get space to take the pulley off. Don;t forget to put the belt back on before you tighten the screws.
Guest - July 25, 2020
Verified Purchase
★★★★★
★★★★★
..Better than OEM
..Take the E-clip off the F-N-R side. Push it in and this will give you some wiggle room from the battery compartment. i put a couple of spot welds on the Hub and the pulley. This made getting the nut on easier. The parts were better that OEM. Happy camper here and will order from them again...!!
James A - August 5, 2020
Verified Purchase
★★★★★
★★★★★
Great and fast service
Just what I needed, brand new parts and really quick shipping. I am happy!
Guest - July 28, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Remove battery and straps that the battery sits on for access to the transmission pulley,
2. Place screw driver through hole in the pulley to secure and remove the nut on top of the pulley.
3. Remove the two springs on the idler assembly to release pressure on belt.
4. You will need to loosen the two bolts on the righ
... Read moret holding the axle to the frame to get enough clearance to remove the pulley. It is not necessary to remove the bolts. Just loosen enough to slightly depress the sale.
5. Jack the tractor up to clear the right wheel.
8. Press down on the right axle and remove the transmission pulley. You only need about a 1/4 inch of additional clearance when you press on the axle.
7 Remove the transmission hub.
8 Replace transmission hub.
8 Replace the transmission pulley and put belt back in place on the pulley.
9 Replace and tighten nup on top of pulley.
10 Tighten the two bolts on right axle that were loosened for clearance and remove jack.
11 Replace two springs on iddler assembly.
12 Replace battery hanger straps and battery.
1. Disconnected spark plug and battery.
2. Jacked up the tractor.
3. Removed rear wheels for better access.
4. Pulled tensioner spring for the transmission belt.
5. Removed engine pulley.
6. Removed both belts and replaced.
7. Installed the new transmission pulley.
8. Installed engine
... Read morepulley and aligned belts.
9. Installed the rest removed to do the repair.
1) Removed 6 bolts hold trans and rear axle in place. (Makes it easier to get on the 9/16 flange nut.
2) Used an impact driver to remove the 9/16 flange nut. (With a normal socket or wrench the whole rear end turns).
3) Remove stripper pulley and 5/8 spline, replaced with new Spline, pulley and flange nut.
4) With b
... Read moreelt around the pulley, tighten flange nut with impact.
5) Re-install 6 bolts holding trans and rear end back in place.
6) Assemble belt on idler and tension wheel and attach spring. Complete
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
