This is an authentic OEM sourced replacement part that is intended to be used with lawnmowers from Troy-Bilt, Yard-Man, and MTD. The blade adapter is used to link the motor pulley, blade, and the belt to allow the drive shaft to rotate the blade. This item is available as an individual replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Just what I needed and just in time
The part fit my mower perfectly and it arrived just in time for the first mowing of the year.
Guest - May 11, 2020
Verified Purchase
★★★★★
★★★★★
Part seems better then factory part.
Probably won't buy any other parts because of the use of FedEx to deliver. Delivery was very slow and took way longer then expected.
Michael - May 26, 2020
Verified Purchase
★★★★★
★★★★★
all good
yep, all good
Guest - May 9, 2022
Verified Purchase
★★★★★
★★★★★
Perfect
Good
Guest - May 28, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair, fast shipping
Always a great fit
Guest - May 5, 2023
Verified Purchase
★★★★★
★★★★★
Pullu
Fast and correct!
Guest - July 1, 2023
Verified Purchase
★★★★★
★★★★★
Right part
Quick delivery
Richard J - September 6, 2023
Verified Purchase
★★★★★
★★★★★
easy to talk to parts department. fast shipment
perfect replacement part. exact match.
Guest - May 7, 2024
Verified Purchase
★★★★★
★★★★★
Great service and received what I needed!
Ordered a part for my lawnmower. Received exactly what I needed a few days early. eReplacement Parts has once again provided me great service and the part I needed.
Guest - July 18, 2019
Verified Purchase
★★★★★
★★★★★
Disappointed
I receive the product on time. I change it and used. Bad results. The metal is this piece made of is soft. It got worn down on the blade end.
Guest - July 20, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the blade bolt, then the blade support, then the blade Then pull on the adapter to remove it. Clean the engine shaft. Line the key in the new adapter with the key way in the engine shaft and tap it on with a rubber mallet. Then replace the blade, blade support, and blade bolt.
Did you find this story helpful?
Thank you for voting!
Drive pulley was ruined when mower hit a stationary object while mowing.
1. Removed pulley guard (2 bolts into mower deck)
2. Blade bolts had sheared when object was hit
3. Pried pulley off shaft with large screwdriver (shaft had travelled past keyway in pulley)
4. Installed new pulley
5. Placed spare blade, blade support in place, attached bolt
6. Replaced pulley guard
Did you find this story helpful?
Thank you for voting!
Hit a piece of metal which twisted the blade and adapter.
Removed the blade bolt and the blade support, then the blade. I tapped on the adapter to remove it. Line up the key in the pulley to the key way on the shaft and press the new adapter on.Then install the blade, blade support and tighten the blade nut.
Did you find this story helpful?
Thank you for voting!
Pins and middle embossed areas where sheared off when blade be became loose.
Removed old pulley, took about a half hour to hammer it off. Replaced with new pulley.
Once reassembled, the drive didn\'t work. Removed front and belt was still in place. Cleaned area around axle, reassembled. Most of the work involved removing and correctly replacing front cover. Had to tie the belt with cotton string to get the
... Read moreunderside belt cover back on correctly. If you don\'t, the belt will jam in the cover and not engage with the transmission.
Used gear puller to pull old hub from mower
Ordered hub & power belt
Took front of mower apart to replace belt
Installed new hub with anti-seize applied
Removed spark plug wire from spark plug, removed blade, rem0ved drive belt cover. Used punch to remove blade adapter, sanded shaft to remove rust and smooth the shaft, installed shaft adapter with brass mallet. Installed belt drive cover, installed blade. Job complete.. No problem
1. Removed the hex cap screw, bell blade support, and blade.
2. Remove the hex screws holding the cowling over the blade adapter.
3. Tapped the old blade adapter with a hammer to loosen and remove.
4. Greased the spindled for corrosion protection only.
5. Put on the new blade adapter and held it in place with the h
... Read moreex cap screw until I could replace the cowl. (when replace the cowl, the belt goes on the outside of the two metal guide pegs in the cowl)
6. Removed the hex cap screw holding the blade adapter.
7. Put on the blade and bell blade support.
8. Screwed in the hex cap screw and torque to about 40 ft. lbs.
Removed the old blade and blade adapter, removed plastic housing from bottom of the deck to access the drive belt, put on new blade adapter and put on the belt and put on the plastic housing, put on my extra blade (original one bent when obstructioon was hit) and all worked fine.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9061589
Manufacturer Part Number: 687-02528
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 687-02528 MTD Lawn Mower Blade Adapter")
_WW_1.gif "Part Location Diagram of 687-02528 MTD Lawn Mower Blade Adapter")
