Part Location Diagram of 579867MA Murray Chain, Roller #42 X 4
See part D-34 in the diagram
( Grid squares measure 1x1 inch )

Chain, Roller #42 X 4 579867MA

Manufactured by:
Murray
ERP Number:
ERP9034939
Part Number:
579867MA
Original Equipment Manufacturer ?
On Order

A Bit Difficult 

1- 2 hours 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic Murray replacement part, sourced from the original manufacturer for use with snowthrowers. The chain roller is used to link the sprocket hub and the jackshaft that drives the snowthrower's wheels. This chain roller is available as an individual replacement part, please see model diagram for associative parts.

Troubleshooting

This part works with the following brands:
  • Murray
  • Craftsman
  • Briggs and Stratton
This part works with the following products:
  • Snow Blower
Part# 579867MA replaces these:
579867MA,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The teeth on the jack shaft where worn out causing the chain to jump over the teeth.

kelly from buzzards bay, Massachusetts

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
761789MA, 579867MA
I had to remove the bolts on the left side then pry the plate out to get the jack shaft to come out of the bearing . Then getting it back was a nightmare it would have been an easy repair had the manufacturer allow the plate to unbolt an slide out of the way on the drive tire shaft . It would have been a 30 minute repair instead of all da y .
Did you find this story helpful?
Thank you for voting!

18 years of moving large amounts of snow in Ohio for 2 years and 16 years in Minnesota, it happens

David from Apple Valley, Minnesota

2 of 3 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
replace all the parts and turn the monster loose on large amounts of snow in Minnesota to watch it fly far, far away..... thanks for having what I need to keep my snow eating machine growling in the face of Minnesota Winters like
Did you find this story helpful?
Thank you for voting!

Drive chain and sprocket warn out

Richard from Crown Point, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
703251, 73839MA, 579867MA, 583012MA
Remove inspection cover removed left tire from
Axle Remove sprocket bolt w/nut
Removed drive Chain by removing 1 link had clean shaft with grinder
Taped of gear cleaned shaft with grinder installed New gear and roller chain had to Remove master link
To install chain reinstalled master link taped drive Axle Into Place also tighten hold-down clip on Axle also
Taped spacer out through rim and tire assembly too Axle tight from shifting put tire on also Greased roller chain and sprocket replaced inspection cover back on started and tested drive assembly checked auger and found 1 sheer pin missing replaced Snow blower Ready
Did you find this story helpful?
Thank you for voting!

Drive chain broke on my Craftsman Snowblower

Tim from Alaska, Alaska

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
579867MA
1. Installed the new chain.

Note: it was a tight fit in the back to get the chain over the sprocket in the back, I used a wire to help guide and loop it around.

The chain was a perfect fit, no adjustments to the links
Did you find this story helpful?
Thank you for voting!

Friction wheel was worn out and roller chain also was worn out

Henry from Coraopolis , Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Parts Used:
1501435MA, 579867MA, 1733324SM
Removed all the bearing assemblies purchased a chain break tool to remove the original chain there was no master link greased and reassembled. Repair went well. Parts were perfect and fit well.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9034939
Manufacturer Part Number: 579867MA
Brand Model Number Description
Craftsman 536-886331 Snow Blower - Snowblower
Craftsman 536881110 Snow Blower - Gas Snowthrower
Craftsman 536881111 Snow Blower - Snowthrower
Craftsman 536881120 Snow Blower - Gas Snowthrower
Craftsman 536881121 Snow Blower - Snowblower
Craftsman 536881130 Snow Blower - 11 Hp Snowblower
Craftsman 536881230 Snow Blower - 12.5Hp Snowblower
Craftsman 536881260 Snow Blower - Gas Snowblower
Craftsman 536882650 Snow Blower - Snowblower
Craftsman 536884821 Snow Blower - Snow Thrower
Craftsman 536884822 Snow Blower - Snowblower
Craftsman 536885470 Snow Blower - 24" Snowblower
Craftsman 536885471 Snow Blower - Snowblower
Craftsman 536885472 Snow Blower - Snowblower
Craftsman 536885473 Snow Blower - Snowblower
Craftsman 536885920 Snow Blower - Snowblower
Craftsman 536885921 Snow Blower - Snowblower
Craftsman 536886110 Snow Blower - 22" Snowthrower
Craftsman 536886120 Snow Blower - 5Hp 22" Snowblower
Craftsman 536886121 Snow Blower - Snowblower
Craftsman 536886122 Snow Blower - Snowblower
Craftsman 536886140 Snow Blower - 5 Hp 22" Dual Stage 120V Electric Start Snowblower
Craftsman 536886141 Snow Blower - 5Hp Snowblower
Craftsman 536886150 Snow Blower - Snowblower
Craftsman 536886160 Snow Blower - 6Hp Snowblower
Craftsman 536886161 Snow Blower - 6Hp Snowblower
Craftsman 536886180 Snow Blower - 8 Hp Snowblower
Craftsman 536886190 Snow Blower - 8.5 Hp 26" Dual Stage 120V Electric Start Snow Thr
Craftsman 536886191 Snow Blower - Snowblower
Craftsman 536886220 Snow Blower - Snowblower