This item is available as an individual replacement part. The bagger seal attaches to the cover gasket and is made of rubber. A wrench might be helpful during the installation of this part. It will need to be replaced if it becomes broken. This is an authentic part from Husqvarna for use in collection systems and grass catchers.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect Fit
Despite a delay in shipping the parts ordered, I am still very pleased with the service, the communication and the end result. Parts fit perfectly.
Guest - December 26, 2019
Verified Purchase
★★★★★
★★★★★
Fit perfectly!
Great price, fit as expected
Guest - May 27, 2020
Verified Purchase
★★★★★
★★★★★
Great Fit
This gasket for the bagger fit just like the OEM. The OEM part wore out from use. Every time you open the rear bag cover to empty the bags the gasket was rubbing on the pipe for the ejection of grass. Guess this will be a part that gets replaced regularly. But it works.
Guest - June 2, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair and works like new again.
The seal helps with dust control. So much better with the new seal.
Gene - September 23, 2020
Verified Purchase
★★★★★
★★★★★
Received my order on time
.great part fit perfectly
Guest - July 22, 2021
Verified Purchase
★★★★★
★★★★★
Like brand new, easy fix
The part was better than expected and worked like a charm when installed.
Guest - August 17, 2021
Verified Purchase
★★★★★
★★★★★
Great service as usual
You always have what I need and always deliver quickly. You are my first choice
Guest - October 29, 2021
Verified Purchase
★★★★★
★★★★★
Great price.
Fit perfectly! Thanks so much!
Guest - October 20, 2023
Verified Purchase
★★★★★
★★★★★
Received early.
Great seller, fast shipping and part fits great. Kudos to the seller and I would buy from again.
Guest - April 30, 2024
Verified Purchase
★★★★★
★★★★★
Great design.......super part replacement SPEED !
1) design of the part that is being replaced is spectacular. No screws, nuts (potential rust, etc), just plastic push-plug type connectors. Very quick, easy to remove and esp replace.
2) the speed and efficiency of e-ReplacementParts was excellent. Found, bought and had my new part in 2-3 days. Great !
Guest - April 25, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
1- 2 hours
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The bolts fastening the grass catcher chute together needed replaced. I also serviced the mower by changing oil, oil filter, fuel filter and air filter. New lights in headlamps.
Removed hood from mower by disconnecting wiring harness for headlamps and pulling hood off latch.
Drained engine oil and then removed oil filter.
Replaced new filter, then oil plug and refilled engine oil.
Took old fuel filter off on carburetor side first and
... Read moreput new filter on. Then removed old filter off fuel tank side and slid fuel line on to new filter. Very little fuel spill.
Removed cover to air filter and replaced old with new air filter. Reinstalled cover.
Took old headlamps out and replaced with new bulbs.
Reinstalled hood to mower and reattached wiring harness.
Read less
Did you find this story helpful?
Thank you for voting!
Drive belt was slipping causing the mower to not move.
Darren from Bastrop, Texas
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/lawn-tractor-accessories/seals-and-gaskets/"},{"position":2,"name":"532192550","title":"532192550","url":""}]
(966529102)_WW_2.gif "Part Location Diagram of 532192550 Husqvarna Cover Seal")
(966529102)_WW_2.gif "Part Location Diagram of 532192550 Husqvarna Cover Seal")
