Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The Front Drive Wheels were worn out, and the right front wheel had the drive cover shield broken, which had permitted grass to enter the inside of the drive wheel and cause rust on existing axle part
1) Raised and supported the center of the lawnmower frame, freeing the wheels from the surface of the floor. ( I used a 1 gal. paint can, which provided a wide surface, and weight to hold the mower from moving. Didn\'t have to block the back wheels.)
2) Used a screwdriver to help remove the plastic wheel covers (pop off hub caps)
... Read moreand exposed the nut on the wheel, and used a socket set to remove the nut from the wheel axle.
3) Removed the wheel, and the washer between the wheel and the inside of the broken shield, and cleaned the crud from the washer surfaces.
4) Cleaned the crud from the E-Ring, used the straight edged screwdriver blade and the small hammer to tap the E-Ring from the pinion gear axle. Then removed the old pinion gear and corroded parts, and finially the broken plastic inside wheel cover behind the pinion gear.
5) Cleaned and removed all of the crud and rust from the wheel axle as well as the pinion gear area of the drive axle, then lubricated the axle parts with WD-40 to help in the reassembly process. Carefully cleaned the crud from the small E-Ring groove on the drive axle to enable the new E-Ring to fit and lock the new pinion gear assembly in position.
6) Installed the new plastic Pinion Gear shield over the two axles, making sure to work it back over the drive axle hub, then installed the new pinion gear pieces on the drive axle and finally the new E-Ring to hold that in place.
7) Installed the washer over the Wheel axle, then installed the new wheel, meshing the inside teeth on the drive wheel to the pinion gear teeth. Reinstalled the flanged wheel nut, and tightened it, then reinstalled the plastic hub cap.
(Note that there is a \"You Tube\" Video covering the wheel replacement process that might give some confidence to a novice attempting these repairs)
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9020458
Manufacturer Part Number: 532190069
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
