Part Location Diagram of 51115900 Ariens Kit- Rear Wheel Replacement
See part F-28 in the diagram
( Grid squares measure 1x1 inch )

Kit- Rear Wheel Replacement 51115900

Manufactured by:
Ariens
ERP Number:
ERP8998029
Part Number:
51115900
Original Equipment Manufacturer ?
$144.94
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This rear wheel kit fits Ariens walk-behind mowers and includes two wheels for smooth operation and reliable support. Designed for easy installation—remove old wheels and secure the new ones.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Ariens
  • Gravely
This part works with the following products:
  • Lawn Mower
Part# 51115900 replaces these:
07140700,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The wheels and tires were wore out

Jeffrey from Telford, Pennsylvania

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
51116000, 51115900
Received two new front wheels and tires and 2 new back wheels and tires. Pulled the clip and axle out installed new front wheels and tires. Pulled off snap ring, wiggled off old back wheels and tires and installed the new ones. All parts fit perfectly. I am done with the mower shop. Its you guys from now on. Thanks Again.
Did you find this story helpful?
Thank you for voting!

Replacement of worn rear tires

Paul from Hanska, Minnesota

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
51115900
Remove the e-ring from end of shaft with a pair of pliers, remove washer. Remove the old wheels,lube.Then install the new wheels and washer and e-ring
Did you find this story helpful?
Thank you for voting!

After 30 years, the rubber came off the rear wheels

HUMBERTO from SAN ANTONIO, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
51115900
Removed snap ring - removed old wheels - lightly tapped the new wheels in place - installed snap rings
Did you find this story helpful?
Thank you for voting!

Rear wheels were worn out on Ariens mower

DEAN from SPOKANE, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
51115900
Blocked the rear of the mower up.
Removed snap ring, washer, and rear wheels.
Installed the right rear wheel, washer, and snap ring.
Tried repeatedly to install the drive wheel and it would only go part way onto the splined shaft.
I measured with a caliper gauge and found that the splines on the hub were several t housandths
larger than the female socket so had to file them down until it would seat correctly. Other than this problem the project went well.
Did you find this story helpful?
Thank you for voting!

Lawn mower did not start / rear tire was damaged

Charles from Granger, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Parts Used:
790120, 51115900
Local lawn mower repair diagnosed the need to replace the carburetor and supplied the part number.
I placed the lawn mower on a table top which made working on the mower easier.
I removed the old carburetor and supporting attachments.
I installed the new carburetor and supporting attachments.
I removed the retainin g snap rings and rear wheels.
I installed the new wheels and snap rings.
Did you find this story helpful?
Thank you for voting!

Wheel gears worn slipping when attempting to put self propel

raymond from Springfield Township, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
51115900, 05710200, 01149700
New wheels and hardware, installed lubed axles and wheel gears lightly and reassembled
Did you find this story helpful?
Thank you for voting!
  • 1