Part Location Diagram of 503218202 Husqvarna Square Head Screw 5x80
See part G-4 in the diagram
( Grid squares measure 1x1 inch )

Square Head Screw 5x80 503218202

Manufactured by:
Husqvarna
ERP Number:
ERP8996027
Part Number:
503218202
Original Equipment Manufacturer ?
$8.96
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic OEM sourced replacement screw designed for use with a variety of Husqvarna power equipment. Two of these screws are used to secure the muffler. One metal square head screw is included per order.

Troubleshooting

This part works with the following brands:
  • Husqvarna
This part works with the following products:
  • Chainsaw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Old muffler wore out and came off chainsaw.

Luther from KEMPTON, Indiana

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Easy to repair.
1. Removed top cover to saw. (3 Screws)
2. Removed Allen head bolt through the bucking plat to remove silencer bracket.
3. Slid the muffler off the head.
4. Cleaned the area around where the muffler sets and was attached.
5. Installed the square headed bolts, slid the muffler on the bolts, att ached the silencer bracket and tightened the nuts until tight.
6. Attached the silencer bracket to the bucking plate and tightened it down.
7. Took it to the woods and promptly cut down a 20\" diameter Ash tree and then an 18 in Ash.
8. Checked all the screws, nuts that had been replaced to make sure they were tight and then cut up both trees into 16\" rounds.

No problems. Easy repair.

Easy to order and quick shipping.
Did you find this story helpful?
Thank you for voting!

Muffler gasket gone. So replaced nuts and bolts that hold muffler on while doing repair

Dan from Hallstead, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Removed nuts holding muffler bracket and muffler on. Removed bracket, muffler and square head bolts and damaged gasket. Put all the new parts back on and tightened nuts.
Did you find this story helpful?
Thank you for voting!

saw ran poorly rebuilt carbuerator

Daryl from REPUBLIC, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
disassembled the saw , removed carb , reassembled saw
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8996027
Manufacturer Part Number: 503218202
Brand Model Number Description
Husqvarna 50 Chainsaw - Chainsaw
Husqvarna 50RANCHER Chainsaw - Husqvarna Chainsaw Model 50RANCHER/1983-01 (50RANCHER/198301, 50RANCHER/1983 01) Parts
Husqvarna 50SPECIAL Chainsaw - Husqvarna Chainsaw Model 50SPECIAL Parts
Husqvarna 51 Chainsaw - Chainsaw
Husqvarna 51EPA Chainsaw - Chainsaw
Husqvarna 55 Chainsaw - Chainsaw
Husqvarna 55EPA Chainsaw - Chainsaw
Husqvarna 55EU1 Chainsaw - Chainsaw
Husqvarna 55Rancher Chainsaw - Chainsaw
Husqvarna 55RancherEPA Chainsaw - Chainsaw