1. Removed the plastic cover which also holds the gas tank.
2. Removed the plastic housing that contains the electric start button.
3. Removed a side panel to gain access to the electric start motor. Cut the ty-rap that helps hold the motor in place and removed the motor. It was not easy getting at the bolts that secures the m
... Read moreotor to the machine. Torx drivers and sockets are needed to remove the bolts. I was hoping the motor was still good because the snowblower is old and the motor is not made anymore. The motor was good. I replaced the switch and plugged it into an extension cord and pushed the new button and the motor ran. I then put the motor back on the snowblower and screwed the covers back on.
4. I had to wait a while for the parts to get to me because ReplacementParts had to wait for the manufacturer to ship them. I highly recommend ReplacementParts.com and will be a returning customer if I need parts.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8960802
Manufacturer Part Number: 36-8350
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1988)_WW_10.gif "Part Location Diagram of 36-8350 Toro Boot-Switch")
(1988)_WW_10.gif "Part Location Diagram of 36-8350 Toro Boot-Switch")
