This genuine manufacturer supplied overhaul kit is designed for rebuilding carburetor on a Briggs and Stratton engine. This kit contains all the necessary gaskets, diaphragms and other parts to rebuild your carburetor. It is used to fix common problems associated with worn out gaskets or diaphragms. Replacing these items you would need a screwdriver and pliers.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
good part
fast service. thanks,
Guest - May 11, 2019
Verified Purchase
★★★★★
★★★★★
Fixed
Carberater kit fixed my problem
Guest - July 28, 2022
Verified Purchase
★★★★★
★★★★★
missing part
carb.kit had missing part ,now riding mower doesn't start!
Richard - September 30, 2021
Verified Purchase
September 30, 2021
Hi Richard,
Thank you for your review. Please accept our apologies for this situation. From reviewing your order, we show that you have already contacted our customer service line to have this taken care of. If there is anything that we can help you with in the future, please do not hesitate to ask.
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Pulled carburetor off and replaced the fuel mixture adjustment bolts, and replaced the gasket to fuel bowl that came with kit. The old tractor is working good thanks to the new parts. Adjustments were done by trial and error no book on how to adjust fuel mixture.
1. Removed the carburetor.
2. Stripped the carburetor down.
3. Cleaned all parts.
4. Reassembled the carburetor using the new parts from the kit.
5. Mounted the carburetor.
6. Runs great.
Removed carburetor,took it apart,cleaned it thoroughly with carburetor cleaner,rebuilt it with kit,and reinstalled carburetor.Be very attentive as to how choke linkage and idler linkage are positioned before taking apart! I had some trouble and a neighbor helped me figure it out. Taking a picture of it might be a good idea. Took old fuel
... Read morefilter off and installed new one. Also got a new air filter from ereplacementparts.
Read less
Did you find this story helpful?
Thank you for voting!
Carb was dirty and wouldn\'t idle.
MARK from COUPEVILLE, Washington
1 personfound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
The main jet orifice in the carburetor had the screw slot stripped out and the needle valve hole distorted. I was able to get the jet out by placing the carburetor on an anvil and tap the down tube housing the jet with a light hammer. This shattered the shellac that had locked the jet to the aluminum body. I was then able to back the jet
... Read more out using heavy down pressure on the screw driver. the jet locked up again at the top of the hole so I ran the jet to the bottom and used 3/8 bottoming tap to clean up the treads that had been roughed up by the previous \"mechanic\".
It turned out good Carburetor is good as new now!
My local dealer could not find the Carburetor Kit, Thanks for making it so easy!
Read less
Did you find this story helpful?
Thank you for voting!
Mower in storage for approximately 5 years, fuel system need to be rebuilt.
Removed carburettor from engine.
Cleaned outside and inside with carb cleaner
Layed out all of the new carb kit parts.
Disassembled each part, matched with the new and replaced.
Did you find this story helpful?
Thank you for voting!
.Nothing wrong with product purchased. Age deteriorated parts replaced.
Remove carburetor bowl. Remove float with the needle. Remove main carburetor jet and replace with new one. Reinstall float with new needle. Reinstall carburetor float bowl and main adjusting needle valve. Fuel up tank and run engine and adjust fuel mixture to optimum performance.
Lawn Mower
- Cub Cadet Lawn Mower Model 130-512B100/1990 (130512B100/1990, 130 512B100/1990) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
