Air Cleaner Element 17211-ZL8-023

Remove nut from the front axles and remove the old wheels, then lube the axles and slide on the new wheels and tighten the wheel nuts. Remove the air filter cover, remove the old, dirty air filter and install the new one. Remove the old spark plug, gap the new one at 0.030 Runs like a champ now. Thank you!

1. Removed cover for air filter.
2. Removed old air filter.
3. Installed new filter and installed cover in place.
4. Disconnected spark plug wire and then spark plug.
5. Inserted and tightened new plug and reconnected wire.
6. Pulled starter rope and mower worked great.

1.Removed spark plug with spark plug socket
2. Replaced old spark plug with new spark plug
3.Took off air filter cover
4.Replaced old Air filter with a new air filter
5.Put air filter cover on

Front Wheels - Use 9/16\" Socket to remove cap screw, pulled wheels off (found the right wheel sleeve was loose on wheel, spinning on shaft.
Took T-30 Screw Driver Bit, loosen, took left front gear off
Took T-30 Screw Driver Bit, loosen, had problem backing off, had to hold shaft with vice grips to take off front right wheel g ... Read more ear.
Replace both gears, tighten 1/4-20 T-30 screws, attach wheels, tighten 9/16\" capscrew head
Replace air filter with new
Took off self propel drive belt cover, replace tension spring with new
Install drive belt cover
Started lawnmower, mowed yard, very proud of repair
Thanks to the lady who took my order request