Part Location Diagram of 12314016130 Echo Gasket-M. Diaphragm
See part A-14 in the diagram
( Grid squares measure 1x1 inch )

Gasket-M. Diaphragm 12314016130

Manufactured by:
Echo
ERP Number:
ERP8859297
Part Number:
12314016130
Original Equipment Manufacturer ?
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Shindaiwa
  • Echo
This part works with the following products:
  • Chainsaw
Part# 12314016130 replaces these:
12314016130,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Inherited a chainsaw left for years with ethanol gas in the tank. Would not run - period.

Mike from TILLAMOOK, Oregon

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
I pulled and grounded the spark plug to confirm spark and ensure the piston was not seized. I ordered a complete (as could be had) carb. kit from E-R.com. Took some time due to the pandemic. Upon arrival I disconnected the fuel lines and removed the carburetor I replaced the rubber hoses/fuel lines/fuel filter. Took apart the carb and ins talled new diaphragms, gaskets, screen, metering valve from the \'quick kit\'. Cleaned the carb body with cleaner, blew it out with compressed air and reassembled. Installed the carb and cleaned out the spark arrestor and the air filter. the saw will start and run well with a squirt of starter fluid but dies still. It may be needle valves (high / low) but they are no longer available. Is now in the hands of a professional to review my work and determine the issue. When I get it back I\'ll try and remember to update this post with the findings and results. NOTE TO OTHERS - try and use non-ethanol gas or empty the tank after each use if not used daily.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8859297
Manufacturer Part Number: 12314016130
Brand Model Number Description
Shindaiwa 400 Chainsaw - Gas Chainsaw
Shindaiwa 488 Chainsaw - Chainsaw
Shindaiwa 488P Chainsaw - Gasoline Chainsaws
Shindaiwa 490 Chainsaw - Chainsaw
Shindaiwa 550 Chainsaw - Chainsaw
Shindaiwa 575 Chainsaw - Chainsaw
Shindaiwa 577 Chainsaw - Gas Chainsaw
Shindaiwa 577P Chainsaw - Gasoline Chainsaws
Shindaiwa 577PEMC Chainsaw - Gasoline Chainsaws
Shindaiwa 680 Chainsaw - Gas Chainsaw
Shindaiwa 695 Chainsaw - Gas Chainsaw
Shindaiwa 757 Chainsaw - Chainsaw
Echo CS-550EVL Chainsaw - Chainsaw
Echo CS-550EVLP Chainsaw - Chainsaw
Echo CS-590 Chainsaw - Chainsaw
Echo CS-600 Chainsaw - Chainsaw
Echo CS-600P Chainsaw - 59.8cc Chainsaw
Echo CS-620P Chainsaw - Chainsaw
Echo CSG-7410 Chop Saw - Cut-Off Saws Cut-Off Saws (Csg)
Echo CST-610EVL Chainsaw - Chainsaw Twin Cylinder
Shindaiwa EC7500 Chainsaw - Engine Cut-Off Saw
Shindaiwa EC7600 Chainsaw - Engine Cut-Off Saw