Genuine Toro replacement part, this part is sold individually. The Traction Cable engages the drive wheels on the lawn mowers shown below. It is connected to the Traction Bail then to then attached to the traction bracket near the transmission.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
It fit perfectly As good a quality as original.
Took a little longer to get to me but arrived in timr for mowing. The belt was ad original called out. Thanks RLV
Richard - May 13, 2019
Verified Purchase
★★★★★
★★★★★
Traction Cable
Great experience, but it would be nice if instructions were included.
Guest - May 30, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
The part was in great condition and arrived quickly. It installed easily. Unfortunately, the mower caught fire a short while later, ( unrelated issue) and the whole thing was for naught.
Guest - June 2, 2019
Verified Purchase
★★★★★
★★★★★
toro parts
perfect item ,easy to order,always the right part from this e store.
Guest - June 12, 2019
Verified Purchase
★★★★★
★★★★★
Couldn’t be more pleased
The cable assembly fit precisely, was easy to install, and worked perfectly.
Guest - June 17, 2019
Verified Purchase
★★★★★
★★★★★
Awesome Supplier
This Traction Cable was in perfect condition and got me back up and running. This website makes it so simple to find the correct needed part. If you need to call for assistance, they are very helpful, too! Go ahead and shop, you will not be sorry.
Guest - July 13, 2020
Verified Purchase
★★★★★
★★★★★
Toro ps
You’ve made it easier to order parts from you. Thanks
Guest - November 10, 2020
Verified Purchase
★★★★★
★★★★★
Easy Repair - Did the job
I breathed some new life into my 2004 Toro Recycler mower by replacing this part (self-propel actuating cable). So far, so good. Thanks!
Guest - July 29, 2021
Verified Purchase
★★★★★
★★★★★
Easy to install
Great service
Guest - September 17, 2019
Verified Purchase
★★★★★
★★★★★
Fast delivery
Took only two days to arrive and was the right part. I couldn't figure out exactly how to install but with parts department help, we got it done.
Guest - January 31, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Make sure gas tank is empty and run mower until it stops due to lack of fuel. Turn mower on it\'s side (away from the gas tank). Remove the drive cover to expose the cable/spring connection and compress the quick-connect with pliers. Remove the old cable. Replace the new cable and attach the spring, Turn the mower back to it\'s norma
... Read morel position on it\'s wheels. Adjust the tension to the drive handle by loosening the bolt on the main handle. Replace the drive cover.
Removed the two bolts on each side of the body by the front wheels and removed the guard from underneath the mower. Removed the two screws from underneath near the gear box to release the plastic cover on top. Removed the plastic cover. removed the bolt from the cable retainer and pulled out the old cable from the retainer. Removed the tr
... Read moreaction cable spring end and attached the new spring and cable. Pushed the cable through retainer and attached the z hook to the handle. Adjusted the cable tension by moving the cable metal sheet back and forth through the retainer until the right amount of tension was achieved. The cable should not be too tight when handle is fully engaged.
A very easy replacement. Looked to see how the old cable was installed. And then was able to install the new cable. At first I thought the cable was too long, but when I took the slack away from the upper connection and added a couple slip ties lower on the handle to keep the slack from the upper end I have had no problem since.
Did you find this story helpful?
Thank you for voting!
Both cables were old and about to break so I replaced them before it happened.
Removed the old cable
Hooked the spring end of cable near the wheel
Connected cable to the handle
Seemed like the replacement cable was too long, but found YouTube video which made me realize I didn\'t connect the cable to the handle with enough slack
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2004)_WW_1.gif "Part Location Diagram of 105-1845 Toro Traction Cable")
(2004)_WW_1.gif "Part Location Diagram of 105-1845 Toro Traction Cable")
