This is an authentic manufacturer-sourced replacement belt. It is specially designed for use with Ariens snowblowers. This is the main belt that drives the unit. Over time rubber belts tend to stretch out or break eventually requiring replacement. When replacing this belt, make sure to clean off the drive pulleys to prolong the life of the new belt. This part is made of high-quality rubber material and is sold as an individual component. Check the owner's manual for your equipment to ensure the correct repair procedure. A wrench set and a screwdriver might be needed to perform this repair.
Troubleshooting
This part works with the following brands:
Ariens
This part works with the following products:
Snow Blower
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Too off belt guard. Loosened the pulley belt guard/guide. Removed floor pan bolts to allow access to belt pulley. Loosened belt pulley bolts to allow pulley to swivel sideways to allow belt by. Placed belt on pulley. Tightened pulley bolts. Tightened drive pulley guide/ guard. Adjusted idler tightener pulley. Replaced belt cover guard.
1. Took off belt cover
2. Released the spring on the clutch.
3 Took out the two bolts on top of the machine that let it split apart exposing the pulleys
4. Took out the old belt, which was already off the pulleys
5. Put on the new belt, which had to be done while the machine was still cracked apart about 4 inche
... Read mores.
6. Slowly push the machine back together and put the two big bolts back in, making sure the belt is still on the pulleys
7. Replace the belt cover
8. Hook the clutch spring back up
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8802765
Manufacturer Part Number: 07208600
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_4.gif "Part Location Diagram of 07208600 Ariens V-belt- 4l-raw Edge")
_WW_4.gif "Part Location Diagram of 07208600 Ariens V-belt- 4l-raw Edge")
