Part Location Diagram of 07200007 Ariens V-belt- Ha-raw Edge
See part D-30 in the diagram
( Grid squares measure 1x1 inch )

V-belt- Ha-raw Edge 07200007

Manufactured by:
Ariens
ERP Number:
ERP8802136
Part Number:
07200007
Original Equipment Manufacturer ?
$41.37
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This replacement v-belt is supplied directly from the original equipment manufacturer for use with Ariens snowblowers. It is the main drive belt of the unit which engages augers, over time it will wear out and begin to stretch eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality component is made of durable rubber and is sold individually.

Troubleshooting

This part works with the following brands:
  • Ariens
This part works with the following products:
  • Snow Blower

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replace auger belt

Daniel from WALLINGFORD, Connecticut

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
07200007
I gave it a \"hard\" rating because it really takes two guys to do it. Especially when it\'s the first time. You have to disconnect the shute cable, C-clamps and be a bit tricky and disconnect anything else that might be in the way .Devise some type of jack... Blocks, what have you) When you remove the four bolts and the housing opens l ike a jack-knife it\'s a little tough getting the alignment right and back together. The housing is bulky and heavy. Also since we had it apart we checked out everything else, cleaned the unit and greased all fittings, axles, bushings ,etc, so that added to the time.If you were doing this all the time it would get easier and get a medium rating but we were throughout so there is a learning curve.The belt fit perfectly ! The auger worked great during the unit test.
Did you find this story helpful?
Thank you for voting!

Broken blower belt

Al from HUDSON, New Hampshire

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set
Parts Used:
07228600, 07200007
Looked at repair video on U Tube
Followed the instructions
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8802136
Manufacturer Part Number: 07200007
Brand Model Number Description
Ariens 932105 Snow Blower - ST8526LE 8.5hp Electric 26" Snowblowe
Ariens 932506 Snow Blower - ST8526l 8.5hp 26" Snowblower