Part Location Diagram of 06900406 Ariens Cable- Deflector-coated
See part A-24 in the diagram
( Grid squares measure 1x1 inch )

Cable- Deflector-coated 06900406

Manufactured by:
Ariens
ERP Number:
ERP8801201
Part Number:
06900406
Original Equipment Manufacturer ?
$52.95
Special Order

Easy 

30 - 60 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This authentic item is supplied by the original equipment manufacturer for use with Ariens snowblowers It is an identical replacement for a missing or a faulty cable that was installed on a new unit. The purpose of this component is to allow a user to adjust the deflector, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct application of this part. Keep in mind this high-quality rubber insulated metal cable is sold individually.

Troubleshooting

This part works with the following brands:
  • Ariens
This part works with the following products:
  • Snow Blower
Part# 06900406 replaces these:
06900018,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The existing chute deflector cable seized up rendeing the deflector useless.

Kevin from Gilford, New Hampshire

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Wrench (Adjustable)
Parts Used:
06900406
With needle nosed pliers and adjustable wrench, removed the old deflector cable. Reversed the process to install the new cable. Very easy....part ordered was the correct one and the delivery was on time.
Did you find this story helpful?
Thank you for voting!

Chute Deflector jammed and would not move.

Robert from RACINE, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable), Wrench set
Parts Used:
06900406
1: Removed one end of old cable by loosening nuts at control lever.
2: Other end will disengage from chute by pulling chute all the way down to create slack.
3: My unit had a cable guide on the frame that had to be unbolted to release the old cable.
3: Just reverse the process to put new cable on.
4: Minor adj ustment of the nuts on the control lever end to get the full range of movement.
Did you find this story helpful?
Thank you for voting!

Snowblower chute controls were broken on three different types of machined

Nazarian from SALEM, New Hampshire

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Removed damaged and broken parts. Replaced each piece as needed. Now have three functional snowblowers.
Did you find this story helpful?
Thank you for voting!
  • 1