This is an original Ariens replacement part manufactured for use with snowthrowers. This chute gear is a plate that is rotated by a pinion gear. This chute gear attaches to the chute, and allows it to rotate when the chute crank is turned. The chute gear is sold individually, please see model diagram for additional parts.
My chute gear on my Ariens snow blower was worn and didn\'t rotate all the way to the right.
My ereplacement\'s part arrived promptly and I disassembled the chute assembly and installed the new gear piece quickly. I actually used the ereplacement\'s chute schematics from the website to insure I put all the pieces back in t
... Read morehe proper order. Since I had the chute assembly apart I lubed up all the moving parts with grease or oil and put it all back together.
The chute turns completely in both directions now.
Removed the 2 cover cap screws, and then removed the retaining pin from the chute gear. Then removed the lock nut from the bolt holding the pinion gear. I was then able to replace the chute gear, pinion gear, friction plate, compression spring, and all washers with new replacement parts. The job took about a 1/2 hour as I took my time an
... Read mored the chute now works like new.
1. Remove chute gear cover.
2. Remove nut, tension spring, and washer under chute gear.
3. Remove bolt and broken chute gear.
4. Insert new chute gear and nut.
5. Attach washer, tension spring, and nut under chute gear.
6. Check tension by rotating the chute, adjust by tightening/loosening the nut under the
... Read moretension spring as needed.
7. Attach chute gear cover.
Removed bolt at center of gear
Loosen bolt that attaches gear plate to chute
Placed new washer under new flat gear to raise it up a bit to prevent future stripping
Replace everything.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/snow-blower/transmissions-and-clutches/"},{"position":2,"name":"03222900","title":"03222900","url":""}]
_WW_10.gif "Part Location Diagram of 03222900 Ariens Chute Gear")
_WW_10.gif "Part Location Diagram of 03222900 Ariens Chute Gear")
