- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Jump to:
Product Description
?This blower wheel comes with a metallic hub clamp to hold it firmly in place.
Frequently Purchased Together
?Troubleshooting
This part fixes the following symptoms:
- Noisy
- Too hot
- Not Heating
This part works with the following brands:
- Maytag
- Jenn-Air
- International
This part works with the following products:
- Dryer
- Washer Dryer Combo
Part# Y303836 replaces these:
AP4294048, 1245880, Y303836, 3-12913, 3-3836, 303836, Y303836, Y312913,
Videos For installing this part.
?
★
Customer Part Reviews
?
Click to filter by ratings:
- < Prev
- 1
- Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Easy repair
The part was perfect, but shipping was slow. I’m was pleased with the part.
Guest - August 25, 2021
Verified Purchase
Right part and quick delivery.
Part went right together.
Guest - August 13, 2022
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
center of blower wheel rounded out
Tom from Wooster, Ohio
0 of 1 people
found this instruction helpful.
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
- Parts Used:
- Y303836
remove 2 screws at bottom of dryer. pull front of dryer off and place along left side. unplugging door switch not necessary. remove two bolts inside drum to remove blower wheel cover. remove clamp holding blower wheel. remove old blower wheel and install new one lining up the flat on the motor \"D\" shaft. installation is reverse of remov
... Read more
al
Read less
Did you find this story helpful?
Thank you for voting!
Dryer making noise while running, particularly on start up
arthur from FAIRFIELD, Connecticut
0 of 1 people
found this instruction helpful.
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Socket set
- Parts Used:
- Y303836
Removed front panel, (two screws at bottom) removed 4 screws holding front tumbler support. Removed small shield, to gain access to front panel of blower housing. Removed same blower front housing cover, by removing several small screws.
Removed two clamps holding blower to it\'s shaft. One with pliers & one with snap ring pliers. < ... Read more br />Slid blower off of shaft & replaced with new one. Re-installed all parts. Note: Make sure you re-check the belt position on tumbler, prior to re-installing front support. I didn\'t & it made a whistling noise, due to misalignment! had to go back in & re-align the belt.
Removed two clamps holding blower to it\'s shaft. One with pliers & one with snap ring pliers. < ... Read more br />Slid blower off of shaft & replaced with new one. Re-installed all parts. Note: Make sure you re-check the belt position on tumbler, prior to re-installing front support. I didn\'t & it made a whistling noise, due to misalignment! had to go back in & re-align the belt.
Read less
Did you find this story helpful?
Thank you for voting!
Dryer was noisy, but dried fine.
Gregg from Rohnert Park, California
0 of 1 people
found this instruction helpful.
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench (Adjustable)
- Parts Used:
- WP6-3037050, Y303836
I initially ordered a new belt, and new drum rollers. As I began disassembly, I realized that the fan cage \"d-shape\" had worn into a circle! This was actually the main problem, but I decided, since I WAS IN THERE, TO REPLACE THE AFOREMENTIONED PARTS, BUT ALSO THE IDLER PULLEY.
Did you find this story helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP2200270
Manufacturer Part Number: Y303836
Manufacturer Part Number: Y303836
| Brand | Model Number | Description |
|---|---|---|
| Maytag | DE106 | Dryer - Electric |
| Maytag | DE107 | Dryer - Electric |
| Maytag | DE110 | Dryer - Electric |
| Maytag | DE180 | Dryer - Maytag Dryer Model DE180 Parts |
| Maytag | DE18CA | Dryer - Electric |
| Maytag | DE18CM | Dryer - Electric |
| Maytag | DE18CS | Dryer - Electric |
| Maytag | DE18CT | Dryer - Electric |
| Maytag | DE19CA | Dryer - Electric |
| Maytag | DE19CD | Dryer - Electric |
| Maytag | DE19CS | Dryer - Electric |
| Maytag | DE19CT | Dryer - Electric |
| Maytag | DE210 | Dryer - Electric |
| Maytag | DE212 | Dryer - Residential |
| Maytag | DE21CA | Dryer - Electric |
| Maytag | DE21CM | Dryer - Electric |
| Maytag | DE21CS | Dryer - Electric |
| Maytag | DE21CT | Dryer - Electric |
| Maytag | DE22CA | Dryer - Electric |
| Maytag | DE22CS | Dryer - Electric |
| Maytag | DE22CT | Dryer - Electric |
| Maytag | DE23CD | Dryer - Electric |
| Maytag | DE24CA | Dryer - Electric |
| Maytag | DE24CM | Dryer - Electric |
| Maytag | DE24CS | Dryer - Electric |
| Maytag | DE24CT | Dryer - Electric |
| Maytag | DE25CS | Dryer - Electric |
| Maytag | DE26CA | Dryer - Commercial |
| Maytag | DE26CD | Dryer - Commercial |
| Maytag | DE26CS | Dryer - Electric |
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖