Unscrew two screws holding guard screw new one in place. Guard tube is somewhat in the way and a short allen wrench would be helpful but not necessarily
1. Remove fuel tank cap, fuel pick-up filter, chain and bar, starter rope housing, handle and hand guard.
2. Remove screws securing engine assembly to springs and fuel tank.
3. Remove engine assembly and disconnect black fuel lines from fuel tank assembly.
4. Remove screw holding trigger cover in place.
5. Remove p
... Read morein holding trigger and spring assembly.
6. Install trigger and spring and reinsert retaining pin.
7. Position engine assembly on new fuel tank assembly so that you can reach the fuel lines.
8. Carefully re-seat fuel lines so that they do not leak.
9. Reposition engine assembly slightly to align bolt holes.
10. Replace bolts in appropriate holes
11. Reinstall handle and hand guard.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_4.gif "Part Location Diagram of 546836601 Husqvarna HAND GUARD")
_WW_4.gif "Part Location Diagram of 546836601 Husqvarna HAND GUARD")
