Part Location Diagram of 84013569 Briggs and Stratton VALVE-INTAKE

See part J-34 in the diagram

VALVE-INTAKE 84013569

Manufactured by:: Briggs and Stratton
ERP Number:: ERP19670553
Part Number:: 84013569

$31.77

A Bit Difficult

1- 2 hours

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Repair Instructions

Troubleshooting

This part works with the following brands:

Briggs and Stratton

Part# 84013569 replaces these:

499597, 697464, 792200,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult

1- 2 hours

(3 rated repairs) ?

< Prev
1
Next >

Sort by:

wore out parts, Lower oil seal blue out

John from PLEASANTVILLE, Pennsylvania

2 of 2 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Screw drivers, Socket set, Wrench set
Parts Used:: 84013569, 84013574

Did you find this story helpful?

Bent push-rod.

Norman from Divide, Colorado

2 of 2 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers, Socket set, Wrench set
Parts Used:: 84013569, 693997, 694865, 690949, 690970, 492932B

1. Removed the head.
2. Checked for damage, found a sticky valve and a bent push-rod.
3. Replaced the valve parts and the push-rod. Runs fine now.

Did you find this story helpful?

engine ran rough. found bent intake pushrod

Jared from LIvingston, Montana

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers, Socket set, Wrench set
Parts Used:: 84013569, 690982

found bent pushrod and that the intake valve was sticking that caused it to bend.
removed cylinder heads and removed valves.
cleaned head and block service.
lapped new intake valves and old exhaust valves.
installed new valve stem seals and reinstalled valves.
installed cylinder heads.
motor runs good n ... Read more

Read less

Did you find this story helpful?

< Prev
1
Next >