1. Removed the blade assemble
2. Remove the motor assemble
3. Got stuck on how to remove the armature.
4. Took off Blade lock assembly then broke the screw
5. Armature still stuck
6. Took off blade height adjustment to see if could find a way to take off the armature
7. Took off the table top from mount
... Read more. Could not find a way to remove armature
8. Table saw in pieces. Jump up and down scream a !
9. Ready to dump the table saw, then read comments on ereplacement blog and found answer on where armature screws were
10. Take off armature. Ordered parts. Took to shop to remove bearing. Pressed new bearing in
11. Took off gear cover, found out that need to pull gear off, then bearing, to remove gear assembly from gear cover. Did not have the new bearing and old one was fine. Decided not to change gear cover. Did not repair blade lock and will use a piece of wood to remove saw blade
12. Put everything back then found out needed to take everything apart in order to put armature back on. Needed to do first. Wasted 1 hour of work. Jump up and down again. screamed and yelled. Saw recommendation in blog to use long screws, I did not have any. Used 12awg electrical wire to line up holes. pulled as close as I could carefully. Tried for 20 minutes. Ready to scream and yell #!#$!@#!! but was eventually successful in getting the mounting screws in.
14. Put armature back on - replaced brushes, restore motor assembly
15. Put remaining pieces back. Replaced power cord. Plastic grommets on original power cord would not fit since new cord was more thicker. Drilled out hole on switch assemble to accept the thicker cord with wider grommet placement. Clean up and oil all the remaining moving parts on Table saw.
16. Fire up the saw - it was music to my ears.
The repair was difficult but your website was a breeze to use . Wish there was a video on how to repair my model of table saw. Would have saved me some time and !#$!%^!! but at least I found the answers and parts needed.
Thanks eReplacement parts!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19513929
Manufacturer Part Number: 2610996876
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
