Set saw angle to 45 degrees lock in place.
Tip saw to get to motor from bottom
Remove red handle and release rod
Remove cover where wires go in.
Let that hang
Remove motor brushes
Remove motor housing 4 phillips screws
Rotate housing 45 degrees
Wiggle and use small screwdrivers to pry
... Read moreCover and field come off armature
If you are replacing bearing exposed on brush end...do it while the armature is in the saw.
Removing the armature requires screws and adjusters on the blade end to come off...you lose all the adjustments and cost yourself an extra hour.
Pull bearing...you need just the right size puller.
Use a socket or pipe to push the new bearing on...not a serious tight fit..you need to push/pound on the race closest to the shaft to not damage the bearing.
Rubber cup is in plastic housing cap...mine was damaged....right puller was my biggest hassle...took one apart and used it differently than intended!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19510599
Manufacturer Part Number: 2610004595
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
